Windows 10: Hard disk drive not recognized in Win 10

Hi I have two hard drives one sony and a toshiba. Both these drives have stopped working since yesterday. I can't see usb mass storage driver in disk management. I tried installing it manually but couldn't.

:)

 

Windows 10 1909 Causes Secondary Hard Drive to not be Recognized

Installing the Windows 10 1909 Update causes my secondary hard drive to not be recognized.

Steps to confirm issue:

• Secondary drive not visible in Windows Explorer
• Secondary drive not visible in device manager
• Secondary drive not visible in disk manager

Steps to replicate issue:

• Installing 1909 update

Steps to resolve issue:

• Uninstall 1909 update

Since updates can only be delayed for so long, an actual fix would be appreciated.

 

Hard drive not recognized Windows 10

Hi Curtis,

Thank you for posting in Community.

We understand your concern and we will provide the assistance you required to resolve the issue.

Before we proceed, I would like you to provide the information stated below:

1. Is the portable hard drive connected to your PC via USB cable?

2. Did you get any error message that the drive was not recognize by your PC?

For now, I would suggest that you check if the USB cable that connects the hard drive and the PC is not damaged. If not, then I would suggest that you connect your hard drive to another PC and check if the device is recognized in that particular computer.

If the device gets recognized, then I would suggest that you connect the external hard drive, open File Explorer and check if the drive has an assigned letter. If not, open Disk Management while the drive is connected to the system and follow the steps below.

1. Right click on the Start Menu and select Disk Management

2. Right click on the external drive>Select New Simple Volume and
assign letter to the drive.

Hope this helps

 

How to Partiton a Hard Drive in Vista

This is a way to get Vista to see another hard drive that is not associated with the OS. There is some times when your new hdd doesn't seem to want to work well with Vista. But, there is a solution in it.

Open the Computer Management By doing these steps.

• Click on the Start Button
• Click on Control Panel
• Click Administrative Tools
• Double click on Computer Management

You are now in the Navigation panel of the Computer Management.
When in Computer Management, you then have to allow the new drive to be recognized.

• Double click on Storage
• Double click on Disk Management

Now in the middle of your screen there is the layout of the Disk Drives that you have. The drives that are partitioned will show by the drive lettering. The others will just show up as having nothing at all in them. Below that there will be the Disk drives that are installed into the computer. You'll see that the primary one will all ways read as "Disk 0". Then you will have Disk 1 and so on. Under the Disks there will also see your CD-Rom drives.. If there is more then one, it will be labeled the same as Disk drives..

On to the Partitioning of the drive in question.

• Right Click on the drive
• Click to format the drive or Enable Volume. There will be a series of windows that open up. This is Vista's formatting. Just go threw the windows, and make sure everything is the way you want it to happen.
• Once the formatting is done, will take some time depending on the drive size.
• Right click on the drive
• Click on Mark the Partition as Active

After you have done those steps, The drive will be up and running threw Vista.



:Side Notes:
If you are not the Administer to the Os, then you will have to enable it..
You may also want to redo the drive lettering of it all. But, I really don't see a reason to do so. If you do, you have to redo drive paths and so forth.. A lot of work on something so small...