Windows 10: Hard drive is not showing

I had two partition disk D and disk E but now they are not showing in this PC nor in disk management, moreover there is recovery partition, how to get back my disks, please help me out all my data was in that disks

:)

 

Hard Drive not Showing

Hi Lori,

Thank you for posting back.

• How are you connecting the Hard drive to your computer?
• Have you tried connecting the hard drive to a different computer and check if it works?

It's possible that your USB drivers are corrupt. I suggest you to try the following steps and check.

• Press Windows Key +R and type
  devmgmt.msc to open Device manager.
• Expand Universal Serial Bus controllers
  at the left bottom.
• Right-click the first USB controller under Universal Serial Bus controllers, and then click on
  Uninstall to remove it.
• Repeat these steps for the entire USB controller under Universal Serial Bus controllers.
• Restart the computer. After the computer starts, Windows will automatically scan for hardware changes and reinstall all the USB controllers that you uninstalled.

Keep us posted with the status of the issue to assist you further.

Thank you.

 

External Hard Drive

Hi John,

We suggest that you try the troubleshooting steps below:

• Open your External Hard Drive file in File Explorer.
• Type the name of the file you want to search on the search box and click Enter.

The file will show up in Search Results and you will be able to move it to the correct folder.

Let us know if you need further help.

 

Overclock your hard drive!!!

Heres a much easier hack that I realized quite a few years ago that really does work!

REQUIREMENTS:

• Hard drive with molex power connection.
• PSU with more than 1 strand that has molex plugs on it.
• Wire strippers, soldering iron if you're fancy, electrical tape if you're not.

STEPS:

• Take the strand of connectors from your PSU, and decide which one will be the donator for this overclocking adventure.
• Cut the yellow and orange cables, then twist them together.
• Find the power connector you've chosen as the overclocking connector, and release the orange cable from the connector. Now use your preferred method to bind them together, then place it back together.
• Plug in a drive and feel the speed!

Congratulations! You've just overclocked your hard drive!