Windows 10: Hard drive might be failing and a new drive has appeared.

Hello,A couple of days ago I tried to boot up my computer and it came up with an error message, saying:SMART failure predicted on sata6g_ 2: toshiba dt01aca200 Warning back up your data and replace your hard drive.I went out and bought an external hard drive to back my data on to and used the program rufus and Hiren's BootCD PE v1.0.8 to boot up my machine to back up my data.I've since noticed that my computer has acquired a new drive labelled New volume d:, the old d: is now the e:, and this new drive is 1.8tb in size and virtually empty. Containing a bunch of files labelled eula.txt, some

:)

 

Recovery from failed hard drive

Hi,

To assist you better, please answer the following questions;

• 
  What is the make and model of the hard drive?
  
• 
  Did you get any error messages while using the failed hard drive?
  
• 
  When you say failed hard drive, are you referring to external hard drive or internal hard drive?
  

I suggest you to refer to the below Microsoft help article, which explains about the recovery option in Windows 10 and check if it help.

Recovery options in Windows - Microsoft Support

Get back to us for further assistance, we will be glad to help you.

 

unrecognised external hard drive on Windows 10

Since you already reinstalled the drivers of the External Hard Drive, let's run the
Hardware and Devices troubleshooter as it can resolve your concern. You can do that by following these steps:

• 
  Press the Start button.
  
• 
  Type and select Troubleshooting.
  
• 
  Click on View all on the left panel.
  
• 
  Select and run the Hardware and Devices troubleshooter.
  

If the Hardware and Devices troubleshooter doesn’t resolve your concern, we suggest that you change the letter of the External Hard Drive. You can do that by following these steps:

• 
  Press the Start button.
  
• 
  Type and select Control panel.
  
• 
  Select System and Security.
  
• 
  Select Administrative Tools, and a new window will appear.
  
• 
  Double-click Computer Management, and a new window will appear.
  
• 
  Select Disk Management that is located under
  Storage in the left pane.
  
• 
  Right click on the External Hard Drive that is not showing on the File Explorer.
  
• 
  Select Change letter and network path, and a new window will appear.
  
• 
  Select Change, and choose the letter that you want for the External Hard Drive.
  

After changing the letter of the External Hard Drive, we suggest that you reboot your laptop for the changes to take effect.



Let us know how it goes.



Regards.

 

Overclock your hard drive!!!

Heres a much easier hack that I realized quite a few years ago that really does work!

REQUIREMENTS:

• Hard drive with molex power connection.
• PSU with more than 1 strand that has molex plugs on it.
• Wire strippers, soldering iron if you're fancy, electrical tape if you're not.

STEPS:

• Take the strand of connectors from your PSU, and decide which one will be the donator for this overclocking adventure.
• Cut the yellow and orange cables, then twist them together.
• Find the power connector you've chosen as the overclocking connector, and release the orange cable from the connector. Now use your preferred method to bind them together, then place it back together.
• Plug in a drive and feel the speed!

Congratulations! You've just overclocked your hard drive!