Windows 10: hard drive not found ---Help

Hi Really need help here.Don't know what happened but I came back to the pcand it came up with blue screen and "Your device ran into a problem and needs to restart. We'll restart for you" there was aQR image as well but it didn't last long before it went to a win10 logo and "preparing automatic repair". Then it went to "diagnosing your pc". Then back to a blue screen and "AUTOMATIC REPAIR" and underneath "Your Pc did not start correctly" but no mouse operation to choose between "restart" and "Advanced Options". So I restarted manually an

:)

 

Help with external hard drive

Hi Debbra,

Welcome to Microsoft Community.

I appreciate your interest in windows 10 and also for trying the troubleshooting steps to fix the issue. I understand the inconvenience you faced. I will certainly help you with this.

I would suggest you to plug in hard drive then check in disk management you can see the drive or not.

Follow the steps to check Drive in Disk Management.

• 
  Go to the Control Panel then click on the
  Administrative Tools. .
  
• 
  Under the Administrative Tool Click on Computer Management.
  
• 
  Click on Disk Management and check the External Hard Drive.
  

Also check in BIOS whether External Hard Drive is listed or not.

For help with the BIOS settings, refer to the computer manual or contact the manufacturer.

If it doesn’t work then, I would suggest you to update BIOS for updating BIOS contact Lenovo Support.

Follow the link:

http://support.lenovo.com/in/hi/

Disclaimer :

Modifying BIOS/complementary metal oxide semiconductor (CMOS) settings incorrectly can cause serious problems that may prevent your computer from booting properly. Microsoft cannot guarantee that any problems resulting from the configuring of BIOS/CMOS settings
can be solved. Modifications of the settings are at your own risk.

Hope this information is helpful. Please do let us know if you need further assistance, we’ll be glad to assist you.

Thanks.

 

Overclock your hard drive!!!

Heres a much easier hack that I realized quite a few years ago that really does work!

REQUIREMENTS:

• Hard drive with molex power connection.
• PSU with more than 1 strand that has molex plugs on it.
• Wire strippers, soldering iron if you're fancy, electrical tape if you're not.

STEPS:

• Take the strand of connectors from your PSU, and decide which one will be the donator for this overclocking adventure.
• Cut the yellow and orange cables, then twist them together.
• Find the power connector you've chosen as the overclocking connector, and release the orange cable from the connector. Now use your preferred method to bind them together, then place it back together.
• Plug in a drive and feel the speed!

Congratulations! You've just overclocked your hard drive!

 

External Hard Drive

Hi John,

We suggest that you try the troubleshooting steps below:

• Open your External Hard Drive file in File Explorer.
• Type the name of the file you want to search on the search box and click Enter.

The file will show up in Search Results and you will be able to move it to the correct folder.

Let us know if you need further help.