Windows 10: Hardware Change

My bother and I just made a major hardware change including the CPU motherboard ram and added liquid cooling before doing the change we did not back anything up and didn't deactivate windows nothing we launched the computer and there was no OS I added Linux because I knew how to and the windows installer flash drive we had said hard drives didn't have windows 10 when it previously did we are now stuck on how to install windows from there please help.

:)

 

Overclocking / Undervolting guide for Vega 56 or 64?

Here's a quick laundry list:

List of software to use for overclocking and testing
Examples:
Wattman (and how to find and use it, like an overview, including profiles)
Unigine Valley or Heaven (use this for quick testing while changing settings in Wattman and checking for stability / artifacts) ...just suggesting this
How to monitor cores / mem speeds and temps during testing (I've seen screen overlays, and others using GPUz)

Step-by step overclocking in Wattman
Fan speeds
Power limit
Temp limit
Voltages
Core speeds
Memory speeds

 

Unable to activate Windows after hardware change

Hi,

Thank you for writing to Microsoft Community Forums.

Usually the error code 0xC004F213 comes when there is a hardware change done on the computer (like Motherboard or Hard drive). The Windows license is associated with the device hardware. If there is any significant hardware changes, such as replacing
motherboard or hard drive, Windows won’t be able to recognize the license.

I suggest you to try the troubleshooting steps from the article
Reactivating Windows 10 after a hardware change and see if Windows gets activated.

If you are using an OEM computer that came with Windows 7, and the motherboard has not been changed, then you can follow the steps to retrieve the product key that came with your OEM computer. To retrieve the product key follow the steps mentioned
below:

1. Type Command prompt in the search bar, that is on the taskbar.
   
2. Right click on Command prompt icon and select Run as administrator.
   
3. Type the command and press on Enter: wmic path SoftwareLicensingService get OA3xOriginalProductKey
   
4. You will find the product key.
   

Hope it helps.

Please reply with the status of the issue, we will be glad to help you further.

Nikhar Khare

Microsoft Community - Moderator

 

Standard Hardware Security not supported

Hi Paul,

Thank you for writing to Microsoft Community Forums.

We would suggest you to follow the steps mentioned below to run hardware troubleshooter and let us know if that helps.

Type "Troubleshooting" in the
Windows Search bar and press Enter.

1. Click on "View All" in the top left corner.
2. This will display the list of troubleshooters which are built-in in the computer. You can click on Hardware and Devices from the list and you can run the troubleshooter.

Also I would suggest to check if there are any update pending with regard to drivers and to do so, please follow steps mentioned below.

1. Search for Device Manager in
   Windows search bar.
2. Click on Device Manager.
3. Check if there Yellow Exclamation Point in the list of drivers.

Make sure Windows is up to date.

Hope it helps.

Manjunath H

Microsoft Community – Moderator