Windows 10: Hardware Error Issue

Source
Windows

Summary
Hardware error

Date
‎11/‎11/‎2020 3:42 PM

Status
Report sent

Description
A problem with your hardware caused Windows to stop working correctly.

Problem signature
Problem Event Name: LiveKernelEvent
Code: 141
Parameter 1: ffffd5857ca50460
Parameter 2: fffff8065e9c09f0
Parameter 3: 0
Parameter 4: 3a0
OS version: 10_0_19041
Service Pack: 0_0
Product: 768_1
OS Version: 10.0.19041.2.0.0.768.101
Locale ID: 3081

Extra information about the problem
Bucket ID: LKD_0x141_Tdr:6_IMAGE_atikmpag.sys
Server information: 1b889d3f-8b54-44cb-b479-061e37e07703



Any idea what this is about? Recorded when a black out happens. I've updated everything, drivers and the windows.

:)

 

Multiple BSOD hardware issue or driver issue ?

Hi Iriszer0,

Thank you for writing to Microsoft Community forum.

To have a better clarity on the issue and guide you accordingly, respond to the question listed below.

1. What is the make and model of the computer?

I suggest you to try the steps listed in
troubleshoot blue screen errors and check if it works.

Meanwhile you may also go through:

1. troubleshoot CRITICAL_STRUCTURE_CORRUPTION
2. troubleshoot CRITICAL_PROCESS_DIED
3. troubleshoot SYSTEM_SERVICE_EXCEPTION

Regards,

 

Hardware Error Caused Live Kernel Event

Hi Anthony,

Sometimes even newly-bought hardware can be faulty and affect your computer's performance. Have you checked if this error happens when using a different video adapter?

As an initial recommendation, we suggest that you use the Hardware and Devices Troubleshooter, which is a built-in troubleshooter specifically built to find and fix common hardware issues. To do this, follow these steps:

• Click Start.
• Go to Settings.
• Click Update & Security.
• Click Troubleshoot.
• Click Hardware & Devices from the list.
• Click Run the troubleshooter.

Additionally, this may also be happening due to outdated drivers. Follow the steps in this

article to update your drivers, then check if the issue persists.

Let us know if the error disappears after following these steps.

----

If you think this was useful, you may "mark it as an answer" to help those who are facing the same problem.

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.