Windows 10: Having problem with bluescreen

Yesterday I suddenly got a bluescreen, I did nothing and didn't change anything. The problem occurred and today I reinstalled the system, I get bluescreen again. I get bluescreens randomly I don't know what it depends on, temepratures are ok.I am attaching a link to memory.dmpbluescreen

:)

 

Windows 10 1709 System Restore problems...

That seems to be an attempt at Option 2 in the tutorial, which requires you to
a. Boot to a command prompt (Did you?)
b. You then seem to be mixing steps 3,4 and 5, thus your command is incorrect.

I suggest Option 1 is easier.

If you still have problems, please repost listing each specific step and saying which option from the tutorial you are using. Thanks.

 

Bluescreen Memory Management Problems

I may have found what could be your problem
Here is the ram tested by MSI for your board and processor
MPG Z690 CARBON WIFI

Your ram as far as I can see is NOT on that list
Although you do NOT have to use ram on the list, these boards and others are very ram particular and not only must the speed and latency and timings be correct but the layout of the chips on the ram sticks must also be correct.

I suggest you contact GSkill having verified the ram you have is NOT on the list tell them of your problem and see if you can RMA that ram for exchange of 5200 ram ON the list

NOTE the link will not stay on the ram compatibility - on the site click compatibility on the left of the screen and then click ram

 

Bluescreen during Windows 10 installation

Thank you for your reply!

Sadly I don't think the problem is the same. The guy was having problems seeing his RAID volume, I believe Windows would be able to see mine if I only could load the driver or refresh the drive list, only everytime I do so I get the bluescreen.

I just thought that I should try a different USB key. I have a 2.0 key where I'm using a 3.0 key right now.

But thank you for reading, I know it is a long post.

Any other suggestions are welcome!