Windows 10: HDD dock working unreliable. UAS drivers

I`ve got a HDD Dock that working unreliable, it`s a dual docking station. Sometimes when a unplug a hdd and plug a new the hdd goes raw format and most of the times its impossible to recover files. It`s seems that hot plug is working wroing and it goes haywire with fileformat. Already lost data becaese of this. Here is the specs of the hdd dock. Are there any driver alternatives?, I wasn`t able to find anything.

Windows 10 2004

Ryzen 3600

Asrock x470 master sli

980ti

https://preview.redd.it/ema3cw1n0cj...bp&s=97d92c8a019bc9289bd70336544c4429b1e904c1

submitted by /u/ahmlet
[link] [comments]

:)

 

HDD Docking

Hi Tonyo,



Thank you for writing to Microsoft Community forum.

• What is the make and model of the computer?
  
• What is the make and model of the docking station?
  

The computer docking connections located on the bottom of the computer vary between computer models. For the docking station to work properly, the docking posts, eject mechanisms, and electrical connections on the docking station must be compatible
with the connections on your computer model.



Meanwhile, if the docking station is compatible, you may update the device drivers for your docking station and check if it works.



Update device drivers for docking station:

• Open the PC manufacturer support Web site, search for the
  Docking Station Driver for your PC model.
  
• Install the driver suggested and check.
  

If the issue persists, update the BIOS and try connecting the Docking Station again.



Note:

Modifying BIOS/ complementary metal oxide semiconductor (CMOS) settings incorrectly can cause serious problems that may prevent your computer from booting properly. Microsoft cannot guarantee that any problems resulting from the
configuring of BIOS/CMOS settings can be solved. Modifications of the settings are at your own risk.





Regards,

 

HDD Docking

Connected 2 Bay Docking station to my Laptop with 1TB HDD(2.5) and 250GB HDD(3.5). It is not recognized by the Laptop. Removed 1TB HDD(2.5), 250GB(3.5) shown up to my drive. Likely removed 250GB(3.5), connected 1TB(2.5) it didn't recognized. Connected
1TB(2.5) with another sata to USB adaptor, It works. Reason for not detecting in Docking station ?

 

internal drive in docking station doesn't show up on computer

Hi,

The Update the latest chipset drivers
remark Is referring to the motherboard drivers not the HDD.

Other things to check are:

• Plug in a USB flash drive or another USB external HDD
  into the same USB port and see if it works ok as the docking station maybe faulty.

• Check all of the USB controllers in the device manager and see if any are showing a yellow exclamation mark.

Kind regards,

Mark