Windows 10: Hello I got few questions about tcp settings and network adapter settings

Hello, first of all, I am someone who plays a lot of computer games and I have a few questions in my mind. I want my Ethernet adapter and TCP optimization settings to be at the fastest level to reach the game servers and provide low ping. What settings should I change for these?

:)

 

IP configuration not valid - interference from ethernet adapter?

Solution 1: No Internet Access In Windows 8.1or Windows 10

Step 1:

Go to Device Manager → Network adapters.
Step 2:

Expand it (Network adapters).


Step 3:

Select your network adapter


Step 4:

Right click on your wireless network adapter or Ethernet adapter and then tap “Update Driver Software”.
(in this case your network adopter is Ethernet adopter so tap your Ethernet adapter)
Step 5:

Now on a new window you will need to click on “Browse my computer for driver software”.




Step 6:

Then select “Let me pick from a list of device drivers on my computer”.



Step 7:

Now choose the “Manufacturer’s drivers” from the list of two and then click next.



Step 8:

After the completion of the process just restart your PC and check if the problem is solved or not. If not, goto solution 2.



Solution 2: No Internet Access In Windows 8.1,windows10

Step 1:

Open command prompt.
Step 2:

Just go on hitting the enter after typing the each command.
netsh int tcp set heuristics disabled
netsh int tcp set global autotuninglevel=disable
netsh int tcp set global rss=enabled
Step 3:

Now to check if the settings are disabled type:
netsh int tcp show global
then hit enter.
Step 4:

Now the thing left is just rebooting your system and just check if the problem is solved or not and just give feedback.*chuckle*Thumbs

 

Where are the TCP/IP settings in windows 10

If you're asking how to access network diagnostics (the 2nd & 3rd images)

• Control Panel\All Control Panel Items\Troubleshooting\Network and Internet

If you're asking how to access adapter properties to disable NetBIOS (4th image)

• Control Panel\Network and Internet\Network Connections
  • Highlight IPv4
    • Properties - Advanced - WINS

What exactly are you having an issue with?

 

"network adapter" issue in relation to password protected master video

Hi Farahin,

I would suggest you follow the steps below and see if this helps:

Method 1: Update Network Adapter.

Follow the steps to update the Network Adapter drivers:

• Press Windows key + X key and click Device Manager.
• Expand the Network Adapter.
• Right-click on the Network Adapter and click on Properties.
• Go to Driver tab and select Update.
• Restart the computer and check.

Method 2: Reset TCP/IP.

Please follow the steps below:

1. On the Search bar type “cmd” and click
ctrl + shift + Enter to open the Elevated Command Prompt.

1. To Reset WINSOCK entries, type netsh winsock reset catalog and click Enter.


2. To Reset IPv4 TCP/IP stack, type netsh int ipv4 reset reset.log
and click Enter


3. To Reset IPv6 TCP/IP stack, type netsh int ipv6 reset reset.log
and click Enter

Hope this helps. Please respond if you have further related queries.

Regards,