Windows 10: Hello, I have a big problem with my Windows Surface Go3. Today it started an Update while...

Now I got a blue screen with the message "Your device ran into a problem and needs to restart. We'll restart for you. For more information about this issue and possible fixes, visit https://www.windows.com/stopcode. If you call a support person, give them this info: Stop code: DRIVER_VERIFIER_DMA_VIOLATION". I tried to shut down but this isn't possible. The blue screen with the message changes always with black screen, Windows Logo and the information "Please wait". What can I do? I there anyone who can help me to fix this problem.

:)

 

Problem updating Windows Surface Pro 4 with Windows 10 feature updates

Hi,

I have manage to install image for Microsoft Surface Pro 4 by going to https://support.microsoft.com/en-us/...erecoveryimage and download a recovery image for Microsoft Surface Pro 4.

What I did to reset your Surface from a USB recovery drive was:
Step 1: Make sure your Surface is turned off and plugged in (hold down the power
button for 30 seconds).
Step 2: Insert the USB recovery drive into the USB port on your Surface.
Step 3: Press and hold the volume-down button while you press and release the
power button on your Surface.
Step 4: When the Surface logo appears, release the volume button.
Step 5: When prompted, select the language and keyboard layout you want.
Step 6: Select Troubleshoot > Reset your PC.
If prompted for a recovery key, select Skip this drive at the bottom of the
screen.
Step 7: Select the target operating system you wish to reset. This
refers to the current operating system installed on your Surface.
Step 8: Select Yes, repartition the drives, and on the next page, select Next.
Step 9: Choose Just remove my files.
Step 10: Select Reset.
Surface restarts and the Surface logo displays while the reset process continues
(this can take a while).

This always fails and I have to do the below which continues installation.
Windows 10 Installation Media:

1. Insert the Media (DVD/USB) in your PC and restart.
2. Boot from the media.
3. Select Repair Your Computer.

Select Troubleshoot.

1. Choose Command Prompt from the menu:

Type in the command:
Diskpart
Type in the command:
List disk (Note which disk is your Boot drive number mine is 0)
Type in the command:
Sel disk 0
Type in the command:
List vol (Note which volume is the EFI partition mine is 4)
Type in the command:
Sel vol 4
Type in the command:
assign letter=V:
Type in the command:
Exit
Type in the command:
V:
After you have assigned a drive letter Using Diskpart You can format the EFI partition:
Example: if you assigned a letter V to the partition the command would be:
format V: /FS:FAT32
Type in the command:
bcdboot C:\windows /s V: /f UEFI


Now I have an issue that I cannot install Feature Updates. They keep failing to install.
Any ideas how to resolve issue?

 

Windows Hello on Surface Pro 4

Hi,

It really is surprising that you're getting this kind of error message.

Having said that, please provide the answers to the following for us to be able to learn more about your concern:

• Is your Windows 10 updated?
  
• Are your drivers up-to-date? If not, you can follow the steps found on this
  link on how to update your drivers in Windows 10.
  
• What were the changes made before the issue started?
  

In the meantime, you can check this link
for steps in troubleshooting issues with Windows Hello on Surface.

Let us know what happens after following the steps from the link.

Regards.

 

Windows Hello sign error: Couldn't Turn on the Camera. Please sign-inwith you PIN, Surface Pro

Hi Ameera,

Thank you for writing to Microsoft Community Forums.

We understand how difficult it could be when feature do not work the way they supposed to and we truly appreciate the time and effort that you have taken to work on this issue. This issue can occur if the camera driver is not updated or due to some hardware
issues related to the camera. In order to isolate the cause of this error, please follow the methods mentioned below.

Method 1: Check if the camera is working.

1. Log in to the system.
2. Go to Start menu and select Camera app.
3. Check if the camera is working fine.
4. If not, please update camera driver (you can refer
   Update drivers in Windows 10 for the steps).

Method 2: Troubleshoot problems with Windows hello.

Since you are getting the error "Couldn't start camera. Please sign in with PIN", we would suggest you to refer

Troubleshoot problems with Windows hello Surface under the section Windows Hello doesn't recognize my face or fingerprint or there is an error message and try performing the troubleshooting steps and check if it resolves the issue.

Regards.