Windows 10: Hello, if I set my computer to Device owner Will resetting it fix ?

If I set my account to Device owner can I reset my computer and get administrator back?

:)

 

How to factory reset Cisco 1700 Router

Hopefully I can help you here....its a very common thing to happen.


First, I take it you dont know the passwords for console access or telnet/ssh?

I will assume that these devices belong to you.

step 1. Plug a cisco console cable into a serial port on your pc
step 2. Plug other end into Cisco console port
step 3. Using hyperterm or putty or similar connect to the serial port
step 4. boot router, and make sure you clearly can see the output (this confirms you have good serial comms)
step 5. if this fails, adjust the comm port settings (9600, 8,1,n are the default)
step 6. now you have to do the only hard part...send the break command:

Break command list: Break Commands

Go down the list and match your OS and SW and try the sequence suggested.

If this fails several times do what I do: Install putty (free) and then to send a break so you can get into rommom just hit "ctrl-a b".

 

windows Hello states it isn't available on this device

Hi Tom,

Try few of the troubleshooting steps below and check if you are able to access Windows Hello.

Step 1: I suggest you to run
Hardware and Devices troubleshooter as it checks for common problems and makes sure that any new device or hardware connected to your PC is installed correctly.

• Press Windows key from the keyboard, type
  Troubleshooting and select it.
• Click on view all option on the upper left corner of
  Troubleshooting window.
• Select the Hardware and Device
  options from the list.
• Click Next to run the
  Hardware and Device Troubleshooter.

Step 2: Also, I suggest you to update the bio-metric finger print reader from Device Manager and check if it helps.

• Press Windows + X from the keyboard, click on Device Manager.
• Right click on Bio-metric finger print reader, click on
  Properties.
• Go to Drivers tab, click on Update driver software.

Step 3: I recommend you to install all the pending updates on your device and check if it helps.

Steps:

• Connect to the internet.
• Press Windows key and type updates.
• Click on Check for updates.
• Under Windows Updates, click on Check for updates.
• Try to install the updates being shown.

For more information refer:
Windows Hello and privacy: FAQ

Hope it helps. Reply to the post with an updated status of accessing the Windows Hello feature for further assistance.

Thank you.

 

Old Owner Name

I bought a used Axim. I changed the Device ID in Settings -> System ->

About. I changed the owner name in Settings -> Personal -> Owner Info.

But when I use Send To on a Windows 7 "desktop", the option for my

Axim lists the old owner's name. Not a major problem, but definitely

annoying. I couldn't find that name in the registry (on the Axim).

Can anyone suggest another place to look?

Thanks.