Windows 10: Hello, Since many days I am getting BSOD and I am not exactly getting the reason as the...

IRQL_NOT_LESS_OR_EQUALMEMORY_MANAGEMENTPFN_LIST_CORRUPTEven thought that it was due to windows 11, so shifted to windows 10.I have done the MEM86 Test, While doing the driver verifier the device keeps on crashing, so does it mean the RAM is faulty or is the SSD faulty?Here I've attached the minidump:https://drive.google.com/file/d/1TcUs41_LqD6UUr1SjjMT3_-mzFJNvR6_/view?usp=sharing

:)

 

Getting BSOD 0x124 error

Ignore what everone said here.

0x124 BSOD is usually related to VCCIO (VTT), run Prime95 version 26.6 with custom sizes of 512K to 640K with 50% of your memory for at least 8 hours.

If you get a 0x124 BSOD, increase VCCIO voltage by small steps, run Prime95 again until your stable.

If you pass Prime95 512K to 640K without a BSOD, then its Vcore too low. I'd suggest running IntelBurnTest with 80% of your memory to verify stability (8 to 12 hours).

Oh, and yeah, if this problem appeared all of the sudden, the reason is CPU degradation, you can prevent it by enabling C-States or adjust your overclock to use lower voltages.

 

What PSU should i get?

I find NO specs on the psu you listed, not the one ktr listed, ktr also suggested i get the mushkin psu!

 

Cheap Photo box that will get the job done

WEll i took on this project for PP hes a hardware reviewer and wants to get the professional looking pics for the Pc parts

Materials:

• Big cardboard box

• a razor

• white material 3 yards

• cone lights

• stapler

• medical tape

• pvc pipe about 6 inches longer than your box

• white paint any cheap finger paint would work

the project I'm guessing will cost me $30 if it works out properly
I will post pictures and step by step as i do it