Windows 10: Help : Data Lost By Using Diskpart Clean Command

By Installing Windows 11 from Windows 10 , To Make Space for Windows 11I have Entered the Command Diskpart Clean and Then convert the Diskpart to mbrAfter Installing Windows 11, I noticed That There was Only Local Disk C Which is Formatted or Cleared and Other Local Disks From Previous Windows 10 Are gone. Can I Recover Them if Yes How Can I Recover Them by Softwares ? Please Help !!

:)

 

DISKPART CLEAN

Hello

I'm Peter F independent Advisor

You will get this error when you are using diskpart clean command on system disk. The system disk contains the Windows operating system files and other critical files, if you are allowed to clean the system disk, all the data and partitions will be gone. That
will result in a lot of errors and chaos. Meanwhile, the delete volume is greyed out in Disk Management. In this case, the new SSD drive may be regarded as the system disk due to the system files, etc.

Using Windows installation disc to clean

If you have the Windows installation disc, you can follow these steps to solve clean is not allowed issue in Windows 7/8/10:

1. Insert the Windows installation disc, then boot from it.

2. Click Repair your computer> Troubleshoot > Advanced Options > Command Prompt.

3. Then input the diskpart commands to clean hard disk:

diskpart

list disk

select disk [disknumber]

clean

Diskpart Clean

Then you could create a new partition on the drive to solve this problem.

Reference

https://www.disk-partition.com/articles/virtual...

This is a non-Microsoft website. The page appears to be providing accurate, safe information. Watch out for ads on the site that may advertise products frequently classified as a PUP (Potentially Unwanted Products). Thoroughly research any product advertised
on the site before you decide to download and install it.

I hope it helps

 

Lost partitions after Diskpart clean with no OS support

I created a second partition in my HD for installing Windows 10 (in the first I have Window 7) in dual boot but installation asks me a GPT disk so I execute these commands in this order:

- diskpart

- list disk

- select disk

- clean

- convert gpt

- exit

After this I realize I lost all partitions in my disk and I have no OS support.

Can I undo these operations and restore my partitions with my data?

Thanks in advance

 

Data recovery after Diskpart Clean

my PC information:

OS Version: Microsoft Windows 10 Pro, 64 bit, Build 18363, Installed 20200416153044.000000+300

Processor: Intel(R) Core(TM) i5-4210U CPU @ 1.70GHz, Intel64 Family 6 Model 69 Stepping 1, CPU Count: 4

Total Physical RAM: 4 GB

Graphics Card: Intel(R) HD Graphics Family, 1024 MB

Hard Drives: C: 85 GB (49 GB Free); D: 137 GB (116 GB Free); E: 10 GB (3 GB Free); (SSD)

Motherboard: LENOVO 20AMA0W7PB, ver Not Defined, s/n L1HF51C040T

System: LENOVO, ver LENOVO - 2490, s/n PC03VRMP

Antivirus: Windows Defender, Enabled and Updated

Problem:

i'm here just to get solve my pc problem related to data recovery. I wanted to solve some windows 10 problems and for this i tried to installed fresh windows 10 in my laptop but during partition select i deleted recovery partition and 2 more small size (in
megabytes) partitions to have more disk space...after that i deleted C drive and tried to recreate a partition for C drive but there was an error something like:

"We couldn’t create a new partition" so i searched on internet and there was a solution with "diskpart clean" and i applied all these steps:

link (FIX: We couldn’t create a new partition error on Windows 10/11)

1. Start Windows 10 setup using bootable USB or DVD.
2. If you get We couldn’t create a new partition error message close the setup and click the Repair button.
3. Choose Advanced tools and then select Command Prompt.
4. When Command Prompt opens, enter start diskpart.
5. Now enter list disk. You should see the list of all hard drives connected to your computer.
6. Find the number that represents your hard drive and enter select disk 0 (we used 0 as an example, so be sure to replace 0 with a number that matches your hard drive).
7. Enter the following lines and press Enterafter each line:
   • disk 0 clean
   • disk 0 create partition primary
   • disk 0 active
   • disk 0 format fs=ntfs quick
   • disk 0 assign
8. Enter exit in order to close Command Prompt.
9. Start the installation process again.

after that i realized that my D drive is also gone which was a great shock for me because there was very important data. after that i wanted to make partitions of the single drive into C and D drive but it was not working so i installed window in single partition
and after installation completed i shrinked volume C and created D drive using disk management option...that's all the head ache i am facing and i want to recover my important data after this all process which i applied.

please help me to get through this problem.