Windows 10: Help I just built a new pc and bought monitor but it shows no signal

submitted by /u/AsianKidTV
[link] [comments]

:)

 

Monitor not receiving signal from pc after using hdmi passthrough

Hi,

Thank you for writing to Microsoft Community Forums.

HDMI Pass-Through does not work with all devices. Before attempting to set up an HDMI Pass-Through connection, you should make sure the source of the signal such as a Blu-ray player or Set Top Box, supports HDMI Pass-Through.

In order to get clarity on this issue and assist you with appropriate troubleshooting steps, please reply with the answers to the questions below.

1. Did you try a different HDMI cable to connect your PC to the monitor?
2. When you say "my pc will not display to my monitor", are you able to see any error message on it? For example: 'No signal'.

Meanwhile, try the below suggestions and check if this helps.

• If your monitor has an option in the Menu Button to switch the
  Input Source to HDMI Port, I would suggest you to try it.
• Try completely disconnecting your Xbox from the computer and just connect your computer to the monitor and check if you are able to see the display on the monitor.
• Make sure your display is plugged in and turned on.
• Unplug the video cable from both your display and PC, and then reconnect them firmly. After you reconnect the video cable, try moving your mouse on your display.
• Try connecting to different video outputs on your PC. Sometimes a change in driver can cause the video to be sent to a different display adapter or output.
• If you have your own display adapter installed and connected to your display,
  try connecting your display to the built-in video on the motherboard.
• Check for damaged HDMI cable, loose connections, or faulty adapters.

Hope it helps.

We're looking forward to your response.

 

"NO SIGNAL" sign on new built comp

i just built a new desktop today and I hooked up everything right at the right spot and all power supply cords plugged in. I turn on my comp, cpu fan works fine but I get a No Signal sign on my monitor. That monitor worked before with my old desktop but doesn't work with the new one.

My mobo is MSI p4m900m2 and my gpu is GeForce 8600GT 256 mb ddr3.

whats wrong with it?? I cant even get to BIOS cuz my monitor does not get a signal. any suggestions?

 

Monitor Signal Issues

Recently I bought a second monitor so I could do multitasking more efficiently since I only had one monitor before. But since I started using it I noticed an issue. When I would start up my PC, it would display the windows logo on the new monitor and then
after that it would switch to the lock screen on the other monitor and the new monitor would show no signal.

If needed:

The new monitor I got is the Dell E176FP and I had to use a VGA to DVI adapter since my GPU doesn't have a VGA port.

My main monitor is an ASUS VG245H

Graphics Card: PNY GeForce GTX 1050 2GB