Windows 10: Help! I updated my bios due to bsod and now my computer cant boot

I get bluescreens whenever my computer is idle, so I searched up the problem and one of the solutions was to update the bios. So i updated it, but now i get sent to the recovery menu every time I try to boot windows. How can i fix this?

:)

 

Alienware Area 51 m15x BIOS Update Released

If you were among the group of people experiencing overheating issues with your Alienware Area 51 m15x laptop, then there are some good news for you. A new BIOS update, version X29b P3A30 is now available. The update allegedly allows VGA fans to increase up to 5400 rpm and thus better cool the GPU. To obtain the new BIOS, you'll need to email the m15x support line (L: Area51_m15x@alienware.com). In reply you should receive a link to the BIOS .zip archive. Once you download the small file, Alienware recommends to follow the steps described in the Read full story marker.



Open Nero Ultra Edition, click Backup, and then click “Burn Image to Disc.” Next, select the file “m15x_x29b.iso from the unzipped folder.

• Plug your AC adapter in
• Disconnect all third-party peripherals
• Don’t turn off the computer or restart it during the update
• Don’t eject your DVD/Blu-ray drive during the update.

Steps:

• Open BIOS by tapping F12 during boot
• Set BIOS to boot from your CD-ROM drive first
• Save and exit
• Upon reboot, the BIOS flash update will proceed
• Click “Yes” through the prompts
• Restart

Source: LAPTOP Magazine

 

ughhh! BSOD on boot

I guess my computer BSOD on boot right before getting to windows. not sure what the problem is though, everything is stable.

It gave me a list of two files in windows that could have caused the problems

 

Laptop not booting after bios update

Take it apart and try his suggestion is what I would do next. Still what a pain disassemble laptop to fix bios.
RE: Latitude 3330 BIOS update failure
Hi Alex,
sorry about my late. I don't know that you could fix your problem now, but I try help you.
You need remove the Lan card (modular part on motherboard ), because you have a problem with UEFI boot. You can enter in BIOS, if the LAN part is unplugged



RE: Latitude 3330 BIOS update failure







Hy everyone,
I fix this Bios Post error problem.

1. Switch off the computer.
2. Disconnect the AC adapter from the system.
3. Remove the battery from the computer
4. Remote HDD, keyboard, Palmrest
5. Put out the CMOS battery
6. Raise up the LAN/VGA part (2 screws)
7. Take a USB keyboard, connect the AC adapter and press F2
8. If you see the BIOS, almost finished.
9. Put on The CMOS battery, and step in: System configuration / integrated NIC / Turn off "Enable UEFI Network Stack"
10. Turn off and raise down the LAN/VGA part. Test Again. If everything is working you done.

I hope, I could help you
Regards
David