Windows 10: Help!!! Many different BSODs continue after clean install

Hi! I'm a little sleep deprived trying to fix this so forgive me if I'm sparse on some details, but I'll try to do the best I can. A couple weeks into using a newly built computer without issues, my PC has started to BSOD during games. Since then, it's even started to BSOD during normal use without any intensive programs running. Each blue screen has had a range of different error messages, including: INTERRUPT_EXCEPTION_NOT_HANDLEDKERNAL_SECURITY_CHECK_FAILUREIRQL_NOT_LESS_OR_EQUALUNEXPECTED_KERNAL_MODE_TRAPKMODE_EXCEPTION_NOT_HANDLEDLooking online I saw many of these could be caused by fault

:)

 

7 different BSoD

First off this is what I went through once I installed them 11.1 drivers . BSOD till I had to reinstall the OS .
It seems that some maybe missing the point here this STARTED for you after you installed the 11.1 drivers and then as it would seem you are getting them after a clean install of the old drivers . Correct ? If so have you wiped the HDD and did a clean install of the OS ?
If not then I would do this before thinking your cards are going out .

 

7 different BSoD

Hey guys,

I have a serious problem. I make it as short as possible:

• system runs 100 % fine with the 10.12
• updatet to Catalyst 11.1 -> BSoD
• updatet to 11.1 Hotfix -> BSoD
• rollback to 10.12 -> BSoD
• removed ALL AMD files manually, installed 10.12 -> BSoD

• Temps are fine
• no sfc /scannow errors
• no chkdsk errors
• Prime, Furmark all fine
• regardless what driver I install -> BSoD
• I did no hw changes, no OC

Here are my BSoDs I receive:

• 0x0000010e
• 0x1000007e
• 0x0000007e
• 0x0000004e
• 0x0000003b
• dxgmms1.sys
• PFN_LIST_CORRUPT

They all refer to the GPU of course ...

From now on I receive a BSoD every time I try to play a game (especially BC2 and SC II) even if I completely remove the old driver and make a clean install.
Apparently the 11.1 damaged my system irreparable.

Any advice or info would be very much appreciated *Smile

 

BSODs continue after clean install - hardware?

Hello,
I previously posted here regarding a variety of BSODs I was getting on my machine which included various stop codes:

• usbohci.sys
• faulty hardware corrupted page
• kernel security check failure
• memory management

After trying a bunch of things (including some good suggestions from the forum), I gave up and did a clean Win10 install. To be clear, this was a disk format, followed by a fresh/clean install using the Windows 10 .iso image from Microsoft. This is a new thread because I re-installed Windows 10.
To my astonishment, within a day of the clean install, I already got a BSOD, this time saying "Stop Code: Memory Management". This happened as soon as I woke the machine up from idle sleep. Starting to wonder if I have hardware issues. I have installed minimal things beyond the fresh windows copy, including latest Radeon video drivers, but I don't think that's it. I've run the memcheck and diskcheck utility a bunch of times, with no problems indicated. Welcome everyone's thoughts, and thank you again!