Windows 10: Help regarding processor power management in windows.

Yesterday, I installed ThrottleStop and changed power plan in it to high performance. The processor started running around 4.3 ghz. Then I set it to balanced the processor came back to between 1 to 2.2 ghz. The problem was that now it won't go beyond 2.28 ghz even it is turbo processor Intel i5 10th gen. Also there is high fluctuation of processor frequencyfrom 1.4 to 2.2 when idle which was not beforeIt was stable around 1ghz- 1.2ghz.I checked the power plan in control panel it was set to balanced. Also the reset default button was greyed out. I restarted PC but nothing happened. I don'

:)

 

Processor Power Management isn't there

Hello! I have a laptop and i find that the fan is constantly on, and the sound is unbearably loud. I checked various YouTube tutorials and some suggested reducing the CPU's power consumption percentage in the processor power management area (after clicking
advanced power settings). When I click advanced power settings, there is no section titled processor power management. is there a way to reduce the CPU's power consumption percentage, and why cant I find the processor power management section?

Thanks in advance

 

windows xp installation and dual core am

could someone please list the steps they follow to install windows with a dual core processor and windows xp service pack to. I'm reletively new to amd dual core and i feel i'm missing a step. All help will be appreciated. thanx

 

processor power management optimization

ive been playing around with the processor power management options for quite a while already since i noticed that my old notebook's cpu (i7-720qm) struggles with running on full power (mainly due to heat i assume).

i already managed to optimize performance quite noticeably, but some of the settings are not fully clear to me resp. their default settings are quite confusing, even contradicting to their descriptions.

so if there is somebody familiar with processor power management - ie. idle and performance states and their respective settings, some explanations and recommendations would be highly appreciated.

my main aim is to make the cpu run on as few cores/threads possible, clocked as high as possible, before unparking additional cores/threads. ie. to be highly responsive for just a few tasks rather than manage multiple tasks simultaneously, and not getting
throttled because too many threads get unparked although just a few - but clocked high - would manage it better. mainly because most of my tasks much more require few but high clocked threads than more parallel processing.

here are the settings i have set currently:

processor performance increase threshold - 30%

processor performance core parking min cores - 13%

processor performance decrease threshold - 20%

processor performance core parking concurrency threshold - 95%

processor energy performance preference policy - 20%

allow throttle states - off

processor performance decrease policy - ideal

processor performance core parking parked performance state - no preference

processor performance boost policy - 100%

processor performance increase policy ideal - aggressive

processor idle demote threshold - 30%

processor performance core parking distribution threshold - 90%

processor duty cycling - disabled

processor idle disable enable - idle

processor performance core parking decrease threshold - 60%

processor performance core parking decrease policy - ideal

processor idle promote threshold - 50%

minimum processor state - 50%

processor performance autonomous mode - enabled

processor performance core parking overutilization threshold - 80%

system cooling policy - active

processor performance core parking core override - disabled

maximum processor state - 100%

processor performance boost mode - aggressive

processor performance core parking increase policy - ideal

processor performance core parking increase threshold - 80%

processor performance core parking utility distribution - disabled

processor performance core parking max cores - 100%

what confuses me a bit are the default settings in power saver & high performance profiles of

processor idle demote threshold - ps: 20% / hp: 40%

processor idle promote threshold - ps: 40% / hp: 60%

judging from their descriptions, i would actually suggest them being exactly opposite?!

any suggestions on these two options resp. how to optimize the power settings better to achieve what i explained above - as few cores/threads unparked as possible, clocked as high as possible, before unparking more, without capping
min/max states or preventing threads from parking/unparking completely?

thanks