Windows 10: Help with almost unusable usb stick

Hi there. I have a kingston 32gb thumb drive. I tried to install windows on it with rufus and it became read only. It switched to RAW and is write protected. I can't do anything neither from AOMEI partition assistant or diskpart. I already tried "attributes disk clear readonly" but did nothing. And almost anything i do on AOMEI gives error and on diskpart gave I/O device error.Thanks in advance for any help.

:)

 

Installing windows off of a USB stick

Step By Step from vista:
From admin cmd prompt

1. diskpart
1a. list disk
2. select disk 1 (replace 1 with your usb drive)
3. clean
4. create partition primary
5. select partition 1 (replace 1 with your usb drive)
6. active
7. format fs=fat32
8. assign
9. exit

Copy Windows Vista's DVD ROM content to the Flash Drive

xcopy d:\*.* /s/e/f e:\ (d being your vista cd and e being your usb stick)

And that's it, boot off your usb disk

 

USB sticks not recognized...sometimes...Help?

Hi,

To better understand why this happens, please answer the following questions:

• Did this start to happen after installing updates on your computer?
• Does the USB stick work when you plug it to another device?
• Do you get any errors when you connect the USB stick to your computer?

Let's try to run the troubleshooter available on this
page while your USB stick is connected to the computer. It will tell you if it detects anything and automatically correct it.

Let us know if you have questions.

Keep us posted.

 

USB stick previously used as a boot stick for Killdisk not recognized

Try method 2 under Windows 7 8 10 here:
Free to Remove Readonly Attribute in Windows

Method 2: Clear readonly status with Diskpart

In Windows 10, 8, 7 OS, you are also able to run Diskpart in Command Prompt to clear read-only attribute on any partition on your computer. You can follow the tutorial below:

Step 1. Open Command Line and type Diskpart
Step 2. Type list disk
Step 3. Type select disk (disk number)
Step 4. Type attributes disk clear readonly





Then try Clean