Windows 10: Hey there, Im getting BSoD. I think it might have something to do with my hardrives but I'm...

EventDataBugcheckCode122BugcheckParameter10x20BugcheckParameter20x0BugcheckParameter30x0BugcheckParameter40x0SleepInProgress0PowerButtonTimestamp0BootAppStatus0Checkpoint0ConnectedStandbyInProgressfalseSystemSleepTransitionsToOn0CsEntryScenarioInstanceId0BugcheckInfoFromEFItrueCheckpointStatus0CsEntryScenarioInstanceIdV20LongPowerButtonPressDetectedfalseMEMORY.DMPHere's my memory dump. I didn't have any minidump files.Any help is appreciated, thank you so much!

:)

 

Thinking about getting a 1TB m.2

My first thought was that using a 1TB SSD in what is basically a caching scheme is crazy.

On further thought, it's crazy.*Smile

I'd suggest getting this Sabrent Rocket Q 1TB NVMe PCIe M.2 2280 Internal SSD High Performance Solid State Drive R/W 3200/2000 MB/s (SB-RKTQ-1TB) - Newegg.com or this Sabrent 1TB Rocket NVMe PCIe M.2 2280 Internal SSD High Performance Solid State Drive (SB-ROCKET-1TB) - Newegg.com as an alterative to Samsung. If you had a PCI-E 4.0 CPU + motherboard (you do not, at least in your My Computer listing), I'd suggest this: Sabrent 1TB Rocket Nvme PCIe 4.0 M.2 2280 Internal SSD Maximum Performance Solid State Drive With Heatsink (SB-ROCKET-NVMe4-HTSK-1TB) - Newegg.com.

 

Getting BSOD 0x124 error

Ignore what everone said here.

0x124 BSOD is usually related to VCCIO (VTT), run Prime95 version 26.6 with custom sizes of 512K to 640K with 50% of your memory for at least 8 hours.

If you get a 0x124 BSOD, increase VCCIO voltage by small steps, run Prime95 again until your stable.

If you pass Prime95 512K to 640K without a BSOD, then its Vcore too low. I'd suggest running IntelBurnTest with 80% of your memory to verify stability (8 to 12 hours).

Oh, and yeah, if this problem appeared all of the sudden, the reason is CPU degradation, you can prevent it by enabling C-States or adjust your overclock to use lower voltages.

 

Win10 BSOD Machine Check Exception

Hey everyone, so recently I started getting a lot of Machine Check Exception bluescreens and Im not sure what the cause is. Is there a list of steps to figure out what is causing it?

Thank you for your time.