Windows 10: Hi I need to know how to delete USB printer port, I selected Print Server Properties, then...

Hi I need to know how to delete USB printer port, I selected Print Server Properties, then port and delete, BUT give me a message Selected port cannot be deleted, The request is not supported see screen capture below

:)

 

Windows 10 Home Won't Print to Remote Printer


I have three computers.
Machine 1: Windows 10 pro, has the USB Brother HL-5040 printer
Machine 2: Windows 10 pro, prints OK to the remote printer.
Machine 3: Windows 10 home, Used to print, but not anymore (THIS IS THE PROBLEM).
I’ve tried everything that I can think of, and would appreciate any suggestions.
I did these steps on Machine 3 that did not work.

1. Remove the printer device.
2. Add a Printer
3. The printer that I want isn’t listed
4. Select a shared printer by name
5. Browse
6. Select the displayed Machine 1.
7. Select the displayed Printer.
8. Next
9. Failure “Connect to Printer”.
10. Add a printer using a TCP/IP address or Hostname
11. Next
12. Set Hostname to Machine 2, and set port name.
13. Detecting TCP/IP Port
14. Additional Port information required.
15. Device Type – Standard, Brother Port Server
16. Next
17. Detecting the Driver Model
18. Install The Print Driver
19. Select Brother and Brother HL-5040
20. Next
21. Replace the Current Driver
22. Printer Name (setting it to HL-5040)
23. Next
24. Do not share this printer
25. Next
26. You’ve successfully added “HL-5040”
27. Finish

Printing on Machine 3 puts the document in the print queue, which reports error printing.
Printing from Machine 2 to the printer on Machine 1 works perfectly.
All three machines are in the same HomeGroup. Machine 3 can access the shared files from Machine 1.

 

USB 2.0 ports not working?

Hi,

If your computer has a USB 2 port, try using that port instead.

Please try the steps recommended below to uninstall printer software

Press Windows key + X, click Apps & Features or Programs and Features

Select your printer.

Select Uninstall.

Press Windows key + R, type control, hit Enter

Open Devices and Printers.

In the Devices and Printers window look for your Printer. If you see it listed, right-click on it and choose "Delete" or "Remove Device.”

Open up the run command with the "Windows Key + R" key combo.

Type printui.exe /s and click OK.

Click on Drivers tab.

Look for Printer driver. If you see it click on it and click Remove at the bottom.

Select OK.

Select Apply and OK on the Print Server Properties windows.

Close Devices and Printers.

Proceed to reinstall the driver.

 

printer won't work on network but will over usb

his printer has a built-in print server.

What you need to know what ip is being give to the printer. Perhaps you can print a status sheet from the printer.

Then Go to printers in control panel

add a new printer

local printer attached, uncheck automatically detect and install PnP printer

create a new port, select standard tcp/ip port

a new window should open and enter the ip there where it says printer name or IP address (port name then should be also be filled as you go)

and pretty much follow the rest of the steps, you will need to install the printer drivers.


These steps is the easy, but not the right way.

The right way is to use the network option on the initial screw and search for the printer server...but that can be tricky to configure.