Windows 10: hid-compliant pen driver for Desktop

Hello there,



Recently, a friend of mine purchased a Gaomon PD2200 to make drawing a little easier for them. They were having issues getting the pen to work properly especially with the correct drivers/software from Gaomon. I was helping them because they were struggling to get the tablet to work properly. After about 3 hours of reinstalling the correct drivers over and over again, I had a hunch that there was a driver missing from their computer. I tested the Gaomon tablet with 2 other computers; a laptop with Windows 10 and a desktop using Windows 8.1. The tablet worked flawlessly with both of those machines. I went into the device manager to see if I could find any possible issues. When the device manager was open and running with either of the two other computers, there was a driver named "hid-compliant pen" that allowed the pen to interface with the Gaomon PD2200 tablet flawlessly. I noticed that the Lenovo computer my friend has doesn't have this driver and I can't install it from anywhere. Would it be best to factory reset the machine? The computer they use most of the time is a Lenovo machine that was purchased about 3 months ago. I went through Lenovo and downloaded all the correct drivers that might have been missing but to no avail.

:)

 

driver for hid touchscreen compliant

Unfortunately , for the last several months all the suggestions listed I have tried. The realization is that the hid compliant touchscreen is not there anymore under the human interface devices or any where else. Which means there should be a driver
for firmware that actually downloads to someone's computer to get the touchscreen back. which is what is needed you. I followed the directions and the hid compliant touchscreen disappeared. My question is if there is software, firmware, driver or what
ever that can be directly sent to download to my computer to get hid compliant touchscreen back to the device manager.

 

HID Compliant Pen Driver Hidden - No Enable

I had to get a screen replaced for my Surface Book and my pen was lost. Got a new screen, tried to install a new pen but the HID Compliant is hidden and no Enable Function is available. I have tried Windows Updates, Hardware trouble shooting, uninstalled
pen reinstalled, updating BIOS.....no luck.

 

HID-compliant touchscreen - optical feedback

We appreciate the information provided above. To eliminate the optical feedback that you're getting on your device, we suggest that you run these steps:

Method 1: Optimizing the pen and touch option to ensure that device is properly setup.

• Type in Control Panel on the search box.
• Press Enter.
• Click Hardware and Sound.
• Select Pen and Touch.
• Click the Touch tab.
• Remove the tick on the Show visual feedback when touching the screen box.
• Click Apply, and then OK.

Method 2: Refreshing the driver for HID-compliant touch screen to reset the driver settings.

• Press the Windows
  
  +
  X key and select Device Manager.
• Click the drop-down arrow for Human Interface Device.
• Right click HID-compliant Touch Screen and select Disable.
• Allow change to be recognized, then re-enable HID-compliant Touch Screen by repeating
  steps 1 to 3. Then, select Enable.
• Reboot the device. Select Windows
  
  ,
  locate power button, and click Restart.

Feel free to post back if you encounter any challenges along the process.