Windows 10: High DPC and IRQ CPU from Ethernet Driver / Windows Network Stack Causing computer stalling.

thelenko · Nov 21, 2019

Hi,

I am getting periodic temporary freezing (computer becomes unresponsive for up to a minute) while browsing (using any browser).

I ran windows performance analyzer and what jumped out as suspicious is a sudden big spike in DPC and IRQ cpu usage. The stack trace went through various network stack (ndis.sys, tcpip.sys) leading down to the ethernet driver (e1d68x64.sys).

I have tried re-installing Ethernet drivers and doing a complete Windows 10 refresh without success.

How do I further diagnose/repair this, or get the right set of eyes on a potential bug?

Thanks

:)

EckiS · Nov 21, 2019

Very high DPC latency on Win10 in ndis.sys

there was a post with the same problem:

ndis.sys- High DPC latenecy / High DPC CPU usage

which was fixed by disabling power management for the network adapter.

zerowalker · Nov 21, 2019

Something causing high DPC (User process and at times a driver)

Have noticed that i seem to get sky high DPC at soem occasions.
I haven't really suffered from anything before, but recently i had some audio glitches which i haven't been able to reproduce.
As i have overclocked recently with offset voltage i though that might be the cause, however as said i cannot reproduce the audio glitch, might have been something interfering (it was huge glitch though, though it was gonna crash, happened like 2-3 times).

Anyhow, i have tried non-OC as well, but looking at my DPC it seems that it always gets high for some reason.

Especially the User process. Driver has become high, but hasn't confirmed that without OC (it's a bit rarer, and i think it's USB driver, though no idea why).

This is with no overclock, just the default BIOS settings, with only some stuff disabled (USB 3.0, etc, and HDD set to AHCI).

____________________________________________________________________________________________________ _____CONCLUSION
____________________________________________________________________________________________________ _____
Your system appears to be having trouble handling real-time audio and other tasks. You are likely to experience buffer underruns appearing as drop outs, clicks or pops. One problem may be related to power management, disable CPU throttling settings in Control Panel and BIOS setup. Check for BIOS updates.
LatencyMon has been analyzing your system for 0:39:01 (h:mm:ss) on all processors.

____________________________________________________________________________________________________ _____
SYSTEM INFORMATION
____________________________________________________________________________________________________ _____
Computer name: DESKTOP-0S4LJSE
OS version: Windows 8 , 6.2, build: 9200 (x64)
Hardware: ASUSTeK Computer INC., P7P55D-E PRO
CPU: GenuineIntel Intel(R) Core(TM) i5 CPU 760 @ 2.80GHz
Logical processors: 4
Processor groups: 1
RAM: 8190 MB total

____________________________________________________________________________________________________ _____
CPU SPEED
____________________________________________________________________________________________________ _____
Reported CPU speed: 2809 MHz

Note: reported execution times may be calculated based on a fixed reported CPU speed. Disable variable speed settings like Intel Speed Step and AMD Cool N Quiet in the BIOS setup for more accurate results.

____________________________________________________________________________________________________ _____
MEASURED INTERRUPT TO USER PROCESS LATENCIES
____________________________________________________________________________________________________ _____
The interrupt to process latency reflects the measured interval that a usermode process needed to respond to a hardware request from the moment the interrupt service routine started execution. This includes the scheduling and execution of a DPC routine, the signaling of an event and the waking up of a usermode thread from an idle wait state in response to that event.

Highest measured interrupt to process latency (µs): 2752.939787
Average measured interrupt to process latency (µs): 3.868848

Highest measured interrupt to DPC latency (µs): 2713.929781
Average measured interrupt to DPC latency (µs): 1.068377

____________________________________________________________________________________________________ _____
REPORTED ISRs
____________________________________________________________________________________________________ _____
Interrupt service routines are routines installed by the OS and device drivers that execute in response to a hardware interrupt signal.

Highest ISR routine execution time (µs): 145.037024
Driver with highest ISR routine execution time: storport.sys - Microsoft Storage Port Driver, Microsoft Corporation

Highest reported total ISR routine time (%): 0.025945
Driver with highest ISR total time: HDAudBus.sys - High Definition Audio Bus Driver, Microsoft Corporation

Total time spent in ISRs (%) 0.039554

ISR count (execution time <250 µs): 667074
ISR count (execution time 250-500 µs): 0
ISR count (execution time 500-999 µs): 0
ISR count (execution time 1000-1999 µs): 0
ISR count (execution time 2000-3999 µs): 0
ISR count (execution time >=4000 µs): 0

____________________________________________________________________________________________________ _____
REPORTED DPCs
____________________________________________________________________________________________________ _____
DPC routines are part of the interrupt servicing dispatch mechanism and disable the possibility for a process to utilize the CPU while it is interrupted until the DPC has finished execution.

Highest DPC routine execution time (µs): 248.702029
Driver with highest DPC routine execution time: CLASSPNP.SYS - SCSI Class System Dll, Microsoft Corporation

Highest reported total DPC routine time (%): 0.113745
Driver with highest DPC total execution time: dxgkrnl.sys - DirectX Graphics Kernel, Microsoft Corporation

Total time spent in DPCs (%) 0.406193

DPC count (execution time <250 µs): 9160343
DPC count (execution time 250-500 µs): 0
DPC count (execution time 500-999 µs): 0
DPC count (execution time 1000-1999 µs): 0
DPC count (execution time 2000-3999 µs): 0
DPC count (execution time >=4000 µs): 0

____________________________________________________________________________________________________ _____
REPORTED HARD PAGEFAULTS
____________________________________________________________________________________________________ _____
Hard pagefaults are events that get triggered by making use of virtual memory that is not resident in RAM but backed by a memory mapped file on disk. The process of resolving the hard pagefault requires reading in the memory from disk while the process is interrupted and blocked from execution.

NOTE: some processes were hit by hard pagefaults. If these were programs producing audio, they are likely to interrupt the audio stream resulting in dropouts, clicks and pops. Check the Processes tab to see which programs were hit.

Process with highest pagefault count: chrome.exe

Total number of hard pagefaults 15248
Hard pagefault count of hardest hit process: 3996
Highest hard pagefault resolution time (µs): 1476851.217159
Total time spent in hard pagefaults (%): 0.497120
Number of processes hit: 48

____________________________________________________________________________________________________ _____
PER CPU DATA
____________________________________________________________________________________________________ _____
CPU 0 Interrupt cycle time (s): 134.596104
CPU 0 ISR highest execution time (µs): 145.037024
CPU 0 ISR total execution time (s): 3.665128
CPU 0 ISR count: 660559
CPU 0 DPC highest execution time (µs): 248.702029
CPU 0 DPC total execution time (s): 35.394122
CPU 0 DPC count: 8764873
____________________________________________________________________________________________________ _____
CPU 1 Interrupt cycle time (s): 20.109127
CPU 1 ISR highest execution time (µs): 86.400854
CPU 1 ISR total execution time (s): 0.038572
CPU 1 ISR count: 6486
CPU 1 DPC highest execution time (µs): 177.257387
CPU 1 DPC total execution time (s): 0.951958
CPU 1 DPC count: 139024
____________________________________________________________________________________________________ _____
CPU 2 Interrupt cycle time (s): 23.457102
CPU 2 ISR highest execution time (µs): 11.075116
CPU 2 ISR total execution time (s): 0.000155
CPU 2 ISR count: 29
CPU 2 DPC highest execution time (µs): 149.950872
CPU 2 DPC total execution time (s): 0.806114
CPU 2 DPC count: 126011
____________________________________________________________________________________________________ _____
CPU 3 Interrupt cycle time (s): 22.884967
CPU 3 ISR highest execution time (µs): 0.0
CPU 3 ISR total execution time (s): 0.0
CPU 3 ISR count: 0
CPU 3 DPC highest execution time (µs): 146.754361
CPU 3 DPC total execution time (s): 0.883925
CPU 3 DPC count: 130435
____________________________________________________________________________________________________ _____
Click to expand...

DarkDeskes · Nov 21, 2019

DPC HELP NEEDED BADLY IRQ Less than equal

i have major dpc issues. the drivers causing it are MS ACHI StorPort Miniport driver and scsi class system dll.

i need help

i get an error message blue screen saying irq less than equal every once and a while now.

thanks ahead of time

Windows 10: High DPC and IRQ CPU from Ethernet Driver / Windows Network Stack Causing computer stalling.

High DPC and IRQ CPU from Ethernet Driver / Windows Network Stack Causing computer stalling.

High DPC and IRQ CPU from Ethernet Driver / Windows Network Stack Causing computer stalling.

High DPC and IRQ CPU from Ethernet Driver / Windows Network Stack Causing computer stalling.

High DPC and IRQ CPU from Ethernet Driver / Windows Network Stack Causing computer stalling. - Similar Threads - High DPC IRQ

Sticky Notes High CPU usage causing computer to freeze

Sticky Notes High CPU usage causing computer to freeze

Ndis.sys causing high dpc latency and stuttering

High DPC latency causing audio pops

High DPC latency causing audio stutters

Microsoft.Photos.exe causes high cpu usage!

CertPropSvc causes high CPU usage

Something causing high DPC (User process and at times a driver)

high dpc latency causing audio stuttering