Windows 10: High pitched nosie coming from anything connected to aux port

So, I had a problem come up. I plug n anything to the aux port, and it starts making a high pitched noise in the speaker/headphones/earbuds, and i;'ve tried mainly everything i could. Someone recommended me to go get the laptop checked out Nitro 5 AN515-55, but the sound goes away whenever i load up a game example, valorant, it makes no sense to me. I have reinstalled the drivers, I've made the headphones, i've tried different aux cables and different devices too, and it doesn't fix. the headphones work just fine, and this doesn't happen with the USB-C or bluetooth headphones/earbuds. i'

:)

 

Black screen printing wingdings with high pitched tone.

Hello,

Black screen printing wingdings with high pitched tone can be due to outdated drivers. This can also be connected to hardware issue. For us to isolate and identify
if this is a hardware or software issue, we suggest to perform the Windows Hardware Troubleshooter.

To access the Hardware and Devices troubleshooter, follow the steps provided below:

• Type “Troubleshooting” in the Search bar and press Enter.
  
• Click on “View All” in the top left corner.
  
• This will display the list of troubleshooters which are built-in in the computer. You can click on Hardware and Devices from the list and you can run the troubleshooter.
  

Let us know if that worked out for you.

 

CK-100 High Pitched Noise w/iPhone 4

I have just installed a CK-100 into a vehicle. Connected to an iphone 4 via Bluetooth. Music audio is outputted through the RCA sockets into the AUX in of my stereo. Every 10 minutes or so of playing music there is high pitched noise which comes over the
top of the audio. Lasts about 20 seconds and then the audio is OK again. Has anyone had this problem? Both latest firmware's.



Thanks,



Nick

 

Aux port problems

Hi Community,

Some time ago I had a problem in the aux port which I beleive might be a driver problem.

Whenever I plug in the aux cable, earlier it used to show a prompt to select whether I had connected the line in cable, hesdphones, speaker, etc.

Now thta prompt isn't displayed, it automatically recognizes the aux as headphones plugged in, and I can't connect the cable as a Line In..

Please help me out at the earliest!

Windows 10, 64 bit