Windows 10: Horror-PC with new BSOD and alot of other weird problems

Hello,
I know try to get help in an international forum, because i have problems that seem to be extreme-weird. Everything I talk about is about the hardware in my signature. All my components I received in november/december last year and I build everything my own, because i am a pretty fine PC-Crack.

First to the BSOD I just received to day:
The problem seems to be caused by the following file: ntoskrnl.exe
KERNEL_STACK_LOCKED_AT_EXIT
When did it happen? I today plugged in my new...

Horror-PC with new BSOD and alot of other weird problems

 

Weird BSOD problem


Hi Everyone,

I have a weird BSOD problem which I cannot solve for a while(it persists still after upgrade to Windows 10 from Windows 7)

The main strange thing about this is that I get BSOD only after cold boot.
So it acts like this:

1. start PC.
2. Get to Windows Logo Screen
3. BSOD
4. Restart
5. Get to menu where I can try to repair or Start NormallyIf I Choose Repair, it will fail to repair and will try to restoreIf I Choose Start Normally, it will start OK, no BSOD, can work normally, games, browse internet, everything is normal.6. Shutdown PC
7. Next time when I start is all over again i.e. Go to Step 1

I have this problem for a while, so what I tried:

1. Another Windows 7
2. Another HDD
3. Only HDD connected
4. Changed RAM
5. Tried with built in GPU
6. Upgraded to Windows 10

Result is the same as above every time.

Please suggest what could be the cause.
Logs collected with DM_Log_Collector, attached.


Thank you

PS. This thread is a continuation of this one: Frequent multiple errors BSOD. Solved - Windows 7 Help Forums the only thing changed is Windows 10 now. instead of Windows 7. If that helps somehow.

 

PC reboots (no BSOD) on CPU stress

Hi fellow TPU members,

not too long ago, the box my gf's PC was transported in gave way on the stairs. Yes, you got it right, that sent a PC tumbling down a flight of steps alright.

Stuff broke. Also, stuff remained intact somehow.

I bought her a new case, new CPU cooler and we removed the floppy drive, so far so good. But the PC started crashing for no apparent reason, without a BSOD.

I tested:

• Memtest86+, left overnight, 0 errors
• Scanned the HDD for errors, nothing there
• Left FurMark burning up the GFX card and drawing some power, no problems there
• Ran Ubuntu from a Live CD doing nothing special, didn't crash
• Ran OCCT, Linpack, Prime95, all 3 caused reboots within minutes
• Oh, and I disabled "Restart on error" so I'm sure it's not a BSOD.

Now, I can still try and test something CPU intensive on Ubuntu, but my guess is the CPU didn't survive.
Before I do anything drastic like whippin' out the magic wallet and get her a new AMD quad, is there anything I didn't see?
I'm guessing the motherboard could be borkered as well, but can I check that other than replacing the CPU with a working one?
Any suggestions on which proggies I can use from an Ubuntu Live CD to stress the CPU?

 

BSOD help with new PC

Hi,

My new PC (Win 10) has a BSOD every few minutes with a DPC Watchdog violation.

I've followed a number of the typical debug steps:

• Updated drivers inc. chipset and graphics
• In device manager checked IDE ATA/ATAPI controllers, the driver is storahci.sys and I've tried to updated using the Standard SATA AHCI Controller on my PC
• No external devices are attached
• removed AV
• Disabled Sound drivers in device manager

Still the problems are occurring frequently. I have a minidmp file here: 012718-5515-01.dmp

and there is also a 700MB memory.dmp that I can share if it is helpful?

Grateful for any advice that anyone can share. Thanks in advance.