Windows 10: How can I redo the set up of my ssd and hdd disks in Windows 10?

I just finished a new build and transfered all the files including windows 10 from my hdd to a new ssd, everything went well and I haven't had any issues with the new build or windows 10, until now. My ssd drive is almost full and I've cleaned up the disk, removed any unneccesary files and programs but I still need more space. I see how other people have installed Windows 10 on the ssd and the hdd has all the other files on it. I've tried searching to see if I can move the program files onto another disk but I keep being told that Microsoft doesn't recommend to do this because Windows Update a

:)

 

Windows 10 can not optimize HDD, says it is a SSD Help

Hi Steve,

Thank you for posting your question in the Microsoft Community.

Appreciate your efforts to work on this issue.

• Does the BIOS recognizes the disk as HDD or SSD?
  

Suggest you to set the Optimize Drives Service to start automatically from the services window to check if that helps.

1. Open the run window, type ‘services.msc’ and press Enter.
   
2. Search for Optimize Drives Service and select the start-up type as automatic. Also ensure to start the service.
   

If you have set SATA controller to AHCI mode for Solid State Drive, in Device Manager it would show as SATA hard disk.

Follow these steps:

1. Click start, type “Defragment” and click “Defragment and Optimize your drives”.
   
2. On the “Defragment and Optimize your drives” window. Make sure that your SSD is categorized as an SSD.
   
3. If it’s not, then you can set it as a SSD on your bios. This way, you don’t have to exclude your SSD or disable any scheduled defragmentation.
   

Disclaimer: Modifying BIOS/ complementary metal oxide semiconductor (CMOS) settings incorrectly can cause serious problems that may prevent your computer from booting properly. Microsoft cannot guarantee that any problems resulting from the configuring
of BIOS/CMOS settings can be solved. Modifications of the settings are at your own risk.

Hope this helps.

Let us know if you got the help you needed.

Regards,

Srimadhwa B

Microsoft Community-Moderator

 

Upgraded Windows Transfer from HDD to SSD

Hi

My windows was upgraded from 8 to 10 on my laptop few years back. I was trying to get the HDD replaced with SSD. During the copy process, the technician said windows cannot be moved to SSD as it is an upgraded version from 8 to 10.

Kindly guide if there is a possibility to copy the windows to SSD ? If so, please suggest the steps.

 

Switching Windows Boot Manager from HDD to SSD

(1) It is the EFI partition that holds the boot files including the BCD (Boot Configuration Data). The BCD tells the boot process which Windows partition to boot to. It looks like you set the BIOS correctly to boot using EFI (& its BCD) that is on the SSD. However, that is a clone of EFI on the HDD -- which loads the Windows partition that is on the HDD. You need to alter the SSD's BCD to boot to the Windows partition that is on the SSD. Let's see your BCD...

(a) Type CMD into Search, & click Run as Administrator.

(b) Enter the following commands...

BCDEdit /Enum All <<<Show the BCD

DiskPart <<<Enter DiskPart

List Vol <<<List the Volumes

Select Disk 0 <<<Focus on the HDD

List Part <<<List its partitions

Select Disk 1 <<<Focus on the SSD

List Part <<<List its partitions

Exit <<<Exit DiskPart

Use Ctrl-A & Ctrl-C to copy, then post it to us. We can adjust it manually.

(2) It might be as Paloma suggests, that disconnecting the HDD will cause the BCD (on the SSD) to self-adjust. Windows might do an automatic Startup Repair. But I hope it also gets the Recovery partition right.

(3) I guess you want that D: partition. So, after all is well with the SSD, you may plug the HDD back in. But it will be best to delete its EFI, Windows & Recovery partitions. Just keep D:.