Windows 10: How can i use my buletooth adapter on my pc?

This device cannot start. Code 10 The specified request is not a valid operation for the target device. i have tired YouTube videos on how to fix this problem but Generic Mobile broad brand adapter has a triangle with ! inside of it,Bluetooth device personal Area network has a faded screen in device manager, I'm guessing these are the issues of my Bluetooth dongle is not working properly.Bluetooth device has a blank sheet with a orange gear in my device manager, can anyone help me out?

:)

 

Microsoft Display Adapter not getting connected to PC

Hi,

Thank you for posting your response.

I would suggest that you follow the steps below and check if you can find the adapter in Device Manager.

1. Right click on the Start Menu and then click on Device Manager.

2. From the list of Hardware, find the Microsoft Display Adapter and check if you can find the device in question.

I would also suggest that you follow the troubleshooting steps provided in the first link and check if it helps.

Vanessa

 

IP configuration not valid - interference from ethernet adapter?

Solution 1: No Internet Access In Windows 8.1or Windows 10

Step 1:

Go to Device Manager → Network adapters.
Step 2:

Expand it (Network adapters).


Step 3:

Select your network adapter


Step 4:

Right click on your wireless network adapter or Ethernet adapter and then tap “Update Driver Software”.
(in this case your network adopter is Ethernet adopter so tap your Ethernet adapter)
Step 5:

Now on a new window you will need to click on “Browse my computer for driver software”.




Step 6:

Then select “Let me pick from a list of device drivers on my computer”.



Step 7:

Now choose the “Manufacturer’s drivers” from the list of two and then click next.



Step 8:

After the completion of the process just restart your PC and check if the problem is solved or not. If not, goto solution 2.



Solution 2: No Internet Access In Windows 8.1,windows10

Step 1:

Open command prompt.
Step 2:

Just go on hitting the enter after typing the each command.
netsh int tcp set heuristics disabled
netsh int tcp set global autotuninglevel=disable
netsh int tcp set global rss=enabled
Step 3:

Now to check if the settings are disabled type:
netsh int tcp show global
then hit enter.
Step 4:

Now the thing left is just rebooting your system and just check if the problem is solved or not and just give feedback.*chuckle*Thumbs

 

Wireles Display Adapter Lags on PC but not Android

Hello
freact,

Did you notice any changes on your PC prior to the issue? I suggest that you follow the steps outlined in this support article:
Troubleshooting Wireless Display Adapters.

Also, you can try to reset the Wireless Display Adapter. Please follow the steps below:

1. On the adapter, press and hold the reset button for 10 seconds.
2. When the message " Ready to connect "shows, open the
   Action Center.
3. Select Connect, and in the list of displays, select
   Microsoft Wireless Display Adapter.

Please respond to this thread to let me know how the issue progresses. Similarly, if you have more questions, please inform me by replying to this post.