Windows 10: How do I block my PC from detecting certain devices via Bluetooth

/u/hideonsink · Feb 16, 2021

Whenever I turn on Bluetooth on my laptop, it searches and registers a certain tv device MULTIPLE times. It kinda annoyed me but it did not harm me so I just ignored it.

So I was trying to troubleshoot the connection with my controller today and it took forever to load up when I clicked the 'devices and printers' page in settings. When it has finally finished loading up, I think I have figured out the reason: I have 627 multimedia devices registered on my laptop, all with the same name, that fucking tv box from our neighbour or whatever.

The screenshots

How do I stop my laptop from adding more to that list and remove the devices from the list efficiently? I don't want to right-click -> remove the device 600+ times...

submitted by /u/hideonsink
[link] [comments]

:)

Eric Ber · Feb 16, 2021

Bluetooth devices are not detecting

Hi Sanjay,

Conflicts with the Bluetooth settings after the update is one of the possible reasons why your devices are not detected. For us to assist you better, kindly answer the following questions:

Which version and OS build number of Windows 10 is currently installed? To check, press the
Windows key, type winver, and press the
Enter key.

When you reinstall the latest Bluetooth driver, did you uninstall it first? Did you get the latest Bluetooth driver from the device manufacturer's website?

Have you tried the troubleshooting steps in this
link?

Regards.

ameneses54 · Feb 16, 2021

Cannot use bluetooth device

1 pairing is done in settings, devices
1.1 you click on add bluetooth or other device
1.2 you choose bluetooth
1.3 if there is a pairing button on the bluetooth device itself then you press that now. You need to check the instructions for your bluetooth device to see how to do this - several automatically go into pairing mode when they switch on, others have a button that needs to be pressed for, say, 5 seconds.
1.4 the computer detects all available bluetooth devices and you select yours from the list. If yours is not on the list then windows could not detect it.
1.5 it connects - pairing includes connecting
1.6 the computer sounds a buzz in the earpiece then displays your device is ready to go and you click on done
1.7 the device is shown in the devices list below the subheading audio and it shows it as connected
1.8 the device should also appear in control panel, sounds, playback tab
1.9 the device should also appear in control panel, devices & printers
1.10 {i just paired some bluetooth earphones as i typed so i could make sure these notes were correct} you use a music player and the sound comes out of the bluetooth earphones

2 if this is not happening for you then go to contol panel, devices & printers
2.1 right-click on the device & select remove device
2.2 you can now try pairing from scratch again
2.3 several other users have reported that only removing the device with bluetooth command line tools - bluetoothinstaller allowed them to re-pair again [see xzion's guidance below]
2.4 yet others reported that only the keithm code or bungee's guidance worked for them [see below]

3 where is this all going wrong for you?
[i assume we are definitely talking about bluetooth headphones/earphones. I understand that wifi ones do also exist.]

4 additional guidance -

unpair a bluetooth device - tenforumstutorials
connect a bluetooth device in windows - windows help

steps to completely remove a belutooth device so pairing can be done again [post #9, xzion] - tenforums
steps to completely remove a belutooth device so pairing can be done again [post #22, keithm] - tenforums
steps to completely remove a belutooth device so pairing can be done again [post #39, bungee] - tenforums
several people registered in tenforums just to be able to thanks xzion, keithm & bungee. Apparently, what worked for some people did not work for others so each solution seems worth trying.

Denis
Click to expand...

1 pairing is done in settings, devices
1.1 you click on add bluetooth or other device done
1.2 you choose bluetooth done
1.3 if there is a pairing button on the bluetooth device itself then you press that now. You need to check the instructions for your bluetooth device to see how to do this - several automatically go into pairing mode when they switch on, others have a button that needs to be pressed for, say, 5 seconds.
done pairing is succesfull
1.4 the computer detects all available bluetooth devices and you select yours from the list. If yours is not on the list then windows could not detect it. The device is detected
1.5 it connects - pairing includes connecting ok
1.6 the computer sounds a buzz in the earpiece then displays your device is ready to go and you click on done
1.7 the device is shown in the devices list below the subheading audio and it shows it as connected device is not shown
1.8 the device should also appear in control panel, sounds, playback tab device is not shown
1.9 the device should also appear in control panel, devices & printers device is shown
1.10 {i just paired some bluetooth earphones as i typed so i could make sure these notes were correct} you use a music player and the sound comes out of the bluetooth earphones

2 if this is not happening for you then go to contol panel, devices & printers did that and the bluetooth is shown
2.1 right-click on the device & select remove device did that
2.2 you can now try pairing from scratch again did that
2.3 several other users have reported that only removing the device with bluetooth command line tools - bluetoothinstaller allowed them to re-pair again [see xzion's guidance below]
2.4 yet others reported that only the keithm code or bungee's guidance worked for them [see below]

3 where is this all going wrong for you?
[i assume we are definitely talking about bluetooth headphones/earphones. I understand that wifi ones do also exist.]
yes it's the bluetooth earphone

wrapping it up, there is no way to choose the bluetooth device for playback as this option does not show anywhere (not in the taskbar, not in control panel "sounds" "playback option". I've been wondering if the fact that i have an internal sound card (not the motherboard device) has to do with this situation.
I've never been able to use a bluetooth device. Just to let you know with my dell laptop i did the whole procedure in 5 minutes and it worked perfectly.

4 additional guidance -

unpair a bluetooth device - tenforumstutorials
connect a bluetooth device in windows - windows help

steps to completely remove a belutooth device so pairing can be done again [post #9, xzion] - tenforums
steps to completely remove a belutooth device so pairing can be done again [post #22, keithm] - tenforums
steps to completely remove a belutooth device so pairing can be done again [post #39, bungee] - tenforums
several people registered in tenforums just to be able to thanks xzion, keithm & bungee. Apparently, what worked for some people did not work for others so each solution seems worth trying.

Denis
Click to expand...

1 pairing is done in settings, devices
1.1 you click on add bluetooth or other device done
1.2 you choose bluetooth done
1.3 if there is a pairing button on the bluetooth device itself then you press that now. You need to check the instructions for your bluetooth device to see how to do this - several automatically go into pairing mode when they switch on, others have a button that needs to be pressed for, say, 5 seconds.
done pairing is succesfull
1.4 the computer detects all available bluetooth devices and you select yours from the list. If yours is not on the list then windows could not detect it. The device is detected
1.5 it connects - pairing includes connecting ok
1.6 the computer sounds a buzz in the earpiece then displays your device is ready to go and you click on done
1.7 the device is shown in the devices list below the subheading audio and it shows it as connected device is not shown
1.8 the device should also appear in control panel, sounds, playback tab device is not shown
1.9 the device should also appear in control panel, devices & printers device is shown
1.10 {i just paired some bluetooth earphones as i typed so i could make sure these notes were correct} you use a music player and the sound comes out of the bluetooth earphones

2 if this is not happening for you then go to contol panel, devices & printers did that and the bluetooth is shown
2.1 right-click on the device & select remove device did that
2.2 you can now try pairing from scratch again did that
2.3 several other users have reported that only removing the device with bluetooth command line tools - bluetoothinstaller allowed them to re-pair again [see xzion's guidance below]
2.4 yet others reported that only the keithm code or bungee's guidance worked for them [see below]

3 where is this all going wrong for you?
[i assume we are definitely talking about bluetooth headphones/earphones. I understand that wifi ones do also exist.]
yes it's the bluetooth earphone

wrapping it up, there is no way to choose the bluetooth device for playback as this option does not show anywhere (not in the taskbar, not in control panel "sounds" "playback option". I've been wondering if the fact that i have an internal sound card (not the motherboard device) has to do with this situation.
I've never been able to use a bluetooth device. Just to let you know with my dell laptop i did the whole procedure in 5 minutes and it worked perfectly.

4 additional guidance -

unpair a bluetooth device - tenforumstutorials
connect a bluetooth device in windows - windows help

steps to completely remove a belutooth device so pairing can be done again [post #9, xzion] - tenforums
steps to completely remove a belutooth device so pairing can be done again [post #22, keithm] - tenforums
steps to completely remove a belutooth device so pairing can be done again [post #39, bungee] - tenforums
several people registered in tenforums just to be able to thanks xzion, keithm & bungee. Apparently, what worked for some people did not work for others so each solution seems worth trying.

Denis
Click to expand...

mmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm

Vanessa Sohtun · Feb 16, 2021

No sound as PC is connected to a bluetooth device.

Hi Samuel,

As per your description, I understand that there is no sound in your PC as it shows that it is currently connected to a Bluetooth device which you do not recognize.

Before we proceed, I would like you to provide the information stated below:

1. Have you connected your PC to Bluetooth speakers?

2. Do you recognize the device that is connected to your PC?

3. Does the Bluetooth device display under Control Panel > Devices and Printers?

For now, I suggest that you perform the steps below and check if you will be able to remove the device in question.

To remove the device from your PC, follow the steps below

Select Start > Settings > Devices >
Bluetooth.

Select the paired Bluetooth device that you want to remove > Remove device >
Yes.

Your reply is very important to ensure that we provide the appropriate resolution. Do provide the above information so that we can proceed further.

Regards

Windows 10: How do I block my PC from detecting certain devices via Bluetooth

How do I block my PC from detecting certain devices via Bluetooth

How do I block my PC from detecting certain devices via Bluetooth

How do I block my PC from detecting certain devices via Bluetooth

How do I block my PC from detecting certain devices via Bluetooth - Similar Threads - block detecting certain

Certain devices do not connect to bluetooth

Certain devices do not connect to bluetooth

How do I fix bluetooth not detecting ant devices.

How do I fix bluetooth not detecting ant devices.

Is it possible to block certain programs from seeing certain devices?

Is it possible to block certain programs from seeing certain devices?

Is it possible to block certain programs from seeing certain devices?

How do I block my PC from detecting certain devices via Bluetooth?

how do I block users from seeing certain websites?