Windows 10: how do i change my setting on the printer to allow it to receive scans

I am trying to scan a document to my laptop but the printer says the scanner feature is not enabled.

:)

 

Can't "Scan To" from printer. Please help!

The scenenario is the following:

We have multiple subnets in our network. One of them is the security one which is 10.224.2.xxx

Computer A is connected directly into it. Ethernet cable comes out of the wall and goes into her Intel NIC.

Computer B is also connected directly into it. However, ethernet cable comes out of the wall, goes into a dock and then through the USB cable, gets internet.

Computer C is connected to our wireless security network which is 10.224.4.xxx
This computer is allowed on the firewall to talk to 10.224.2.xxx

All three computer have Webroot SecureAnywhere installed. The printer is an EPSON Workforce WF-4640. IP is 10.224.2.122 / 255.255.254.0 / 10.224.2.1 gateway / no iPV6 / 192.168.50.18 & .19 are DNS's. Printer has static IP.

I proceeded to install the drivers on all three computers. Here is where the problem comes.

Computer A installs just fine. Finds the printer on the subnet and completes installation. I can print and scan FROM the computer. I can also scan FROM the printer. When I go to "Document Capture Pro", I can see scan to: COMPUTER A on the list.

Computer B also installs just fine. Finds the printer and completes the installation. I can print and scan FROM the computer, but I cannot scan FROM the printer. It just wont list COMPUTER B at all!. I tried plugging the ethernet cable directly into the laptop, but still, the printer will not show computer B in the scan to list.

Computer C the same story, but worse. I cannot finish the installation properly because it will not find the printer. It is obviously on a different subnet, but it will not let me type in the address so I just cancel the printer finder part. I manually go to control panel and adjust the IP parameters. Same thing, I can print and scan from the computer but cannot scan FROM the printer. It will not list Computer C in the list.

I have tripled checked the EPSON Scan software on each PC. Each has the IP parameters set properly. I have spent days installing and reinstalling drivers, but no luck. Printer has updated firmware. I tried disabling Windows firewall, nothing.
At first I wanted to think it was Webroot, since there is a review on Amazon from a guy that had the same problem, but using Norton. However, how come Computer A works just fine?
When I though it was the dock, I quickly found out it was not as explained in Computer B when I plugged it directly.

At this point, Im running out of ideas. Im not even sure where else to go.

 

win10 sez no drivers for brither hl5040 printer

To be sure that you followed my suggestion correctly, I will specify some steps: CP>devices and printers>add a printer>the printer that I want isn't listed>add a local printer with manual settings>define port>Windows update and install

 

how do i change disconnected setting to connected setting on my printer

Hi Robert,

I suggest you to run the Printer Troubleshooter and check if it helps.

• In Search window type Troubleshooting and click on it to open it.
• Click on Hardware and Sound.
• Then click on Printer to run the troubleshooter. Follow onscreen steps.

I suggest you to try the steps provided in the link below and check if it helps. It helps in checking settings, installing drivers and identifying and fixing the printer issues.

Fix printer problems: Fix printer connection and printing problems in Windows - Microsoft Support


Hope this helps in resolving the issue with the Printer. If the issue persists, do get back to us. We will be happy to assist you.

Thank you.