Windows 10: How do I connect my laptop to 2 monitors with an HDMI splitter 2 in 1 out

I have purchased an HDMI splitter and plugged both my monitiors into it and then into my laptop. when I go to display, my laptop is only identifying 2 screens and not 3? Anything I view on one monitor shows on the other so I can't drag the pages from one screen to another as they both monitors are duplicated and I see the same image on both monitors?

:)

 

Laptop with HDMI splitter

HI,

I have bought a HDMI splitter for my laptop to have 2 monitors. Unfortunately the monitors do not seem to connect. If I plug 1 monitor directly into the laptop, that works but the splitter will not connect to either monitor

 

Laptop with HDMI splitter

Dear Dee DR,

Welcome to the Microsoft Community



Thank you for reaching out to us with your concern about connecting two monitors to your laptop using an HDMI splitter. I understand how important it is for you to have this setup working smoothly.

Based on your description, it seems like you're experiencing difficulty getting the monitors to connect through the HDMI splitter. Let's troubleshoot this together:

1. Check Compatibility: Ensure that the HDMI splitter you purchased is compatible with your laptop and monitors. Sometimes, compatibility issues can prevent devices from communicating effectively.
   
2. Verify Connections: Double-check all connections to make sure everything is securely plugged in. Ensure that both HDMI cables from the monitors are connected to the output ports of the HDMI splitter and that the HDMI splitter's input is connected to your laptop's HDMI port.
   
3. Test with Different Setup: If possible, try connecting one monitor directly to your laptop and another through the HDMI splitter to see if both configurations work individually. This can help identify if the issue lies with the splitter or another component. If possible, test with another HDMI splitter to rule out the possibility of a defective splitter.
   
4. Check HDMI Cable Quality: Sometimes, using poor quality HDMI cables can lead to connectivity issues. Try using known-working HDMI cables to rule out this possibility.
   

If none of the above steps resolve the issue, there might be a compatibility problem with your splitter. Consider contacting the splitter manufacturer’s support for further assistance.

If you have any further questions or need additional assistance, please don't hesitate to ask.



Best Regards,

Martin | Microsoft Community Support Specialist

 

Issue HDMI Splitter(1 male to 2 female). Working,but not really

I am using a HDMI splitter (1 male to 2 female,the one in the image) to display the same image on 2 monitors,both with a 1080p resolution.One of them a graphic tablet display,the other a regular monitor.





I was able to get it working,but once one of these scenarios occurs ,the resolution changes into 640x(and stays locked in the settings,I can not change it.)

• one of the monitors is turned off.
• male HDMI which is plugged into the computer is unplugged ,and plugged back up again.
• When the computer goes into standby.

Basically the computer can't seem to save that state,and turns to 640x



The only solution I found is to manually ,disconnect the graphic display tablet from the splitter,leaving only the monitor connected to the splitter.Then disconnecting the splitter from the computer and connecting it back in.After that connecting the graphic
display tablet to the splitter.

Doing this is quite the unnecessary hassle.

So my question is,if there's a way to save the 1080p state,and not having it changing the display resolution every time the monitors are turned off.

Thanks in advance