Windows 10: How do I enable Diskette A and B in BIOS?

So I've been struggling with my old Siemens laptop. I wanted to install Windows 98 on it, but it seems like the system only sees the floppy drive as a device, not a drive like the hard drive or CD rom drive on this laptop. Even when I have floppy enabled in my BIOS settings, the start BIOS screen says both floppy drive A: and B: are disabled for some reason picture on the bottom. How can I enable them both in my BIOS settings in order to install the operating system? Laptop: Siemens Scenic Mobile 750 with PheonixBIOS, all specifications shown on the photo

:)

 

bios

Hi all i am new in this forum, i need meanings step by step of each item listed in the bios Phoenix-Award

 

Can't Enable Hyper-V in Windows 10 Professional

Hi,



Thank you for writing to Microsoft Community Forums.



I appreciate your effort on this. As per my research the error code 0x800f0831 is generated when .Net Framework 3.5 is not enabled on the computer. I suggest you to try enabling .Net Framework 3.5 on the computer. Follow the steps mentioned below:

1. Press Windows key + R, to open
   Run dialog box.
   
2. Type appwiz.cpl and click on
   OK.
   
3. Click on Turn Windows features on or off.
   
4. Now, select the check box for .Net Framework 3.5 and click on
   OK.
   
5. Restart the computer.
   

You can also check if Virtualization feature is enabled in BIOS or not, if it is not enabled, I suggest you to enable it.



You may also refer the troubleshooting steps performed by Jins Peter replied on August 13, 2019 in the thread

Hyper-V on Windows Pro wont install and see if that helps.



For additional information, you may also refer the article
Step-By-Step: Enabling Hyper-V for use on Windows 10.



Disclaimer: Modifying BIOS/ complementary metal oxide semiconductor (CMOS) settings incorrectly can cause serious problems that may prevent your computer from booting properly. Microsoft cannot guarantee
that any problems resulting from the configuring of BIOS/CMOS settings can be solved. Modifications of the settings are at your own risk.



If the issue persists, I would suggest you to post your query in
TechNet forums, where we have support professionals who are well equipped with the knowledge on Hyper-V to assist you with the appropriate details.




Regards,

Nikhar Khare

Microsoft Community - Moderator

 

wrong bios programmed on my card what now?

are you kidding? or is this being lost in language barriers?(if so, then id suggest trying google translateon the list above, or reading it several times, im sorry that i cant help with that part) the PCIe slot is what you need, thats where you plug the GPU into. follow the step by step guide, that is your solution. VGA= Video Graphics array, or adapter in this case, AKA GPU, Aka, Video Card.

The 2nd gpu acts as a way to boot into OS since you're not able to do so with the damaged GPU. I don't know what your system specs are but if you have onboard graphics enable them in your bios and then reset your PC or do it after a reset depending on what your motherboard requires that will allow you to boot into your operating system then follow the steps after number three in the list above.( note that if you do not have built-in graphics on your CPU this is where you will use a second GPU )

i hope this helps......Best of luck, i have 35minutes to get dressed, and be on a transport to Kessel.......another day covered in Spice, *Frown (atleast im working in the Refinery *Wink )