Windows 10: How do I enable internal GPU when the BIOS doesn't have that option?

Hi I have a HP 285 G3 Microtower PC Ryzen 3 PRO 2200G with Vega 8. Recently I installed a GTX 1050Ti and wanted to have a 2 monitors setup VGA and HDMI, but the problem with that is the GTX 1050Ti only has HDMI, DP and DVI port so I have to use the VGA port from the motherboard Vega 8 and it doesn't work, it said "No input signal" on my monitor and showed error code 43 in device manager. I tried to find "Enable internal GPU" in the BIOS but my PC's BIOS doesn't have such setting and I can't find any solution online. Is there anyway to fix this problem?

:)

 

hd6950 to hd 6970

ok
i ve tried everything:with atiflash from dos,winflash.step by step with bios powercolor hd 6970 from the database.
nothing,doesn´t work.any suggestion????

 

Windows doesn`t start. Authomatic repair doesn`t work.

Thanks again!!

I`m sorry I had not noticed that the text on the picture was in spanish. It says that windows has replaced some damaged clusters in "name" file and "directory". Then, at the end "an unspecified error occurred (75736e6a726e6c2e 4f6)".

I`ll do it and I`ll be updating this thread when I have the report.

- - - Updated - - -

I ran SeaTools. These are the results:




Does it mean my HDD is useless?

 

Start up issue with monitor/GPU - can't access BIOS - Windows 10


I recently changed my GPU and now when I boot my machine with the monitor plugged in I get a blinking cursor appear on a black screen. If I boot without the monitor plugged in and wait about 20 seconds then everything is fine. I understand that as my motherboard has an internal GPU I may need to make a change in the BIOS. However I cannot access the BIOS either from start (del/F2) or from the advanced restart menu - there is no option for UEFI boot.

• I have changed the boot from express and this has not enabled me to access the BIOS
• I have deleted the internal gpu from the device manager and made changes there

Any ideas on what I should do?