Windows 10: How do i fix a unalocated sd card? it will not let me sample new volume

How do i fix a unalocated sd card? it will not let me sample new volume

:)

 

SD card/SD card reader no longer working

Hi. New to this so not sure of category.
I have a Lenovo G70. Windows 10, 64bit
My SD card reader has stopped working.
In Device Manager, the SD card is not listed.
I can't format the card as it is not listed.
I cannot locate the card at all as it is not listed anywhere.
I've tried chkdsk and get 'Cannot open volume for direct access'
I don't even have the icon displaying when micro SD card is inserted.
It did work previously but I had errors. Scanning and fixing did not help.
I place the SD card in my Android phone and it works fine.
Please help!
Thank you for any assistance.

 

Scan and Fix sD Card

refer to these instructions

http://www.windowsphone.com/en-gb/how-to/wp8/phones-and-hardware/use-an-sd-card-to-add-space

"To safely remove the SD card from your phone

Before you take the card out of your phone, you need to go through a few steps on your phone first. Otherwise, it can cause problems with the card itself or the files on it.

• 
  In the
  App list, tap Storage Sense
  
  .
  
• 
  Tap SD card, pan down and tap Remove SD card, then tap
  Yes to confirm.
  
• 
  In the Safe to remove message box, tap OK, then take the card out of your phone.
  

If you don't safely remove the SD card, when you reinsert the card you might see the
Scan SD card and fix errors message box. If that happens, tap
Yes to have your phone scan the card and try to fix any errors. If you see an
SD card scan failed message, insert the SD card into a PC to try and fix it there. To learn more, see this

Microsoft Support article about fixing SD card problems. "

 

Windows 10 recognizes my SD Card as a local drive

Jon,

I think you are saying that -

1 Disk management does not identify that SD card as removable, and

2 Device manager lists that SD card in its Disk drives entry but not in its
Portable devices entry, and

3 Device manager, Disk drives, {SD card}, Properties, Volumes, Populate identifies that SD card Type as Basic [not as Removable].

I am rather astonished. I thought that this was going to turn into a Refresh issue. I have never heard of anything like your problem before.

I have a few suggestions for action followed by some advice about posting a new question on the topic in both this forum & TenForums [www.tenforums.com - auto-formatting is not working at the moment].

Suggestion 1 -

1.1 Go to Device manager and note the SD card
reader Properties, Driver entry [my SD card reader is within the USB Controllers group but that does not mean yours is].

1.2 Go to the computer maker / SD card reader maker and get their latest Windows 10 driver for the SD card reader and install it.

1.3 Go to Device manager and note the new SD card reader Properties, Driver entry

Suggestion 2 - If you cannot do that then

2.1 Remove the SD card

2.2 If a zombie entry for the SD card remains in Device manager, Disk drives then delete it.

2.3 Go to Device manager and right-click, Uninstall the entry for the SD card reader [mine is within the USB Controllers group but that does not mean yours is].

2.4 Restart the computer straight away [merely to avoid any suspicion that observed symptoms might be left-overs from beforehand].

2.5 Windows will redetect the hardware as it starts. You can force it to by clicking on the Device manager toolbar's Scan for hardware changes icon but that really should not be necessary.

2.6 Go to Device manager and note the new SD card reader Properties, Driver entry

Suggestion 3 - If possible -

As Suggestion 2 but deliberately install the new driver at step 2.5 irrespective of what Windows has installed.

- - - - - - - - - - -

If these suggestions do not fix things then I think you need to post a new question on the subject. That will get you a better response than continuing with this current one.

Title - Device manager & Disk management show removable SD card as a fixed drive.

Description -

1 Disk management does not identify the SD card as removable, and

2 Device manager lists the SD card in its Disk drives entry but not in its
Portable devices entry, and

3 Device manager, Disk drives, {SD card}, Properties, Volumes, Populate identifies the SD card Type as Basic [not as Removable].

4 [describe the effect of the problem - the contents of a previous SD card still being shown]

5 [describe the steps you have already taken to fix things - you can just cut and paste from this thread and then adjust verbiage]

- - - - - - - - - -

When you create your new questions, please paste links to them here so I can follow your progress.

Best of luck,

Denis