Windows 10: how do i format a usb to act as the system disk

how do i format a usb to act as the system disk

:)

 

How To Format A Write Protected Flash Memory ?

¿You already tried this one?...

Run CMD


1. diskpart
2. list disk

Then in the 3º step, put the correct number of disk in the list for the usb flash (if it's listed in disk 3, then you'll have to write select disk 3).

2. select disk #
3. clean
4. create partition primary
5. select partition 1
6. active
7. format fs=fat32
8. assign
9. exit

with that commands you will format the flash drive in fat32, if you have a large drive you can select also "format fs=ntfs" in step 7.

good luck!

 

How to reformat USB Recovery Drive

Part of the commands and results were missing from the image.

Open adminstrative command prompt and type or copy and paste:
diskpart
list disk
select disk #
(replace # with the disk number for the flash drive)
attributes disk clear readonly
exit


If the above steps work then you are set.
If the above steps fail then view this link for additional troubleshooting steps:
How to Format Read-only USB Drive Successfully?

 

How to format write protected usb pendrive?

How to format write protected usb pendrive?

tried all stesp from following list, but not sucessful.

Code: http://www.makeuseof.com/tag/how-to-fix-write-protection-errors-on-a-usb-stick/[/quote]