Windows 10: How do I get off the “Diagnosing your PC” screen?

Im stuck on the “Diagnosing your PC” screen and iv tried restarting the laptop multiple times. I have looked up many ways to undo this but their not working! Also, my laptop runs Windows 11.

:)

 

PC Build Steps

Ok just because I like steps i am going to create some steps. Please give me the stamp of approval/disapproval

• Install system in case
  • Remember to connect SSD and optical to same SATA ports on motherboard
• Turn on PC
• setup HDD
• run blend test in prime95 for 30-60 min
  • run realtemp at the same time

• While in Prime95 test
  • if CPU goes above 70c in RealTemp, I have a leaky CPU
  • if my system locks up or blue screens, there is an instability in the system somewhere
  • if my system does not lock up or blue screen, my CPU is not damaged and I am in the clear!

What do you guys think??

 

Overclocking / Undervolting guide for Vega 56 or 64?

Here's a quick laundry list:

List of software to use for overclocking and testing
Examples:
Wattman (and how to find and use it, like an overview, including profiles)
Unigine Valley or Heaven (use this for quick testing while changing settings in Wattman and checking for stability / artifacts) ...just suggesting this
How to monitor cores / mem speeds and temps during testing (I've seen screen overlays, and others using GPUz)

Step-by step overclocking in Wattman
Fan speeds
Power limit
Temp limit
Voltages
Core speeds
Memory speeds

 

froze screen

Hi,

Windows 10 may have encountered a system conflict that caused this issue. Since you can't access anything after it got stuck to 75%, we suggest that you perform a startup repair. Kindly follow the steps below on how to perform this troubleshooting step:

• Boot to Advanced Startup Options from a hard reboot. Press and hold the power button on your PC until it powers off and until it powers on.
• Repeat steps 1 and 2 above until you see the Windows logo screen or Please wait
  during boot. Usually it may take repeating up to 3 times.
• Select See advanced repair options.
• Under Advanced Startup Options, select
  Troubleshoot.
• Select Advanced options. Under Advanced options, select
  Startup Repair.
• If prompted, select an administrator account to provide credentials for approval, type in the password and click
  Continue.
• Startup Repair will now start Diagnosing your PC, and attempt to automatically repair it.

Please allow a couple of minutes or hours to diagnose your PC by the startup repair.

Kindly get back to us with the results.