Windows 10: How do I get the ethernet RJ45 driver for bootcamp

Hello all,I recently installed bootcamp on 2 of my MBPs. I was able to get the wifi driver. Once on wi-fi, I was able to download and install all the updates: drivers, cards, etc., via the Apple Updater, in Windows. But, none of the updates installed the ethernet RJ45 connector drivers. What step am I missing?Thank you, in advance, for any help.Regards,MJ

:)

 

Cannot connect to ethernet no valid ip configuration

We appreciate the information you've provided. We'd like to confirm the results after following the steps on the link provided on our previous post.

Meanwhile, to isolate your concern, we suggest that you check the following:

• 
  If the Ethernet port is clean.
  
• 
  If the end of RJ45 (Ethernet cord) is still intact.
  
• 
  If available, test the RJ45 (Ethernet cord) to your other device and check if issue persists.
  

We look forward to your reply so we can assist you further.

 

IP configuration not valid - interference from ethernet adapter?

Solution 1: No Internet Access In Windows 8.1or Windows 10

Step 1:

Go to Device Manager → Network adapters.
Step 2:

Expand it (Network adapters).


Step 3:

Select your network adapter


Step 4:

Right click on your wireless network adapter or Ethernet adapter and then tap “Update Driver Software”.
(in this case your network adopter is Ethernet adopter so tap your Ethernet adapter)
Step 5:

Now on a new window you will need to click on “Browse my computer for driver software”.




Step 6:

Then select “Let me pick from a list of device drivers on my computer”.



Step 7:

Now choose the “Manufacturer’s drivers” from the list of two and then click next.



Step 8:

After the completion of the process just restart your PC and check if the problem is solved or not. If not, goto solution 2.



Solution 2: No Internet Access In Windows 8.1,windows10

Step 1:

Open command prompt.
Step 2:

Just go on hitting the enter after typing the each command.
netsh int tcp set heuristics disabled
netsh int tcp set global autotuninglevel=disable
netsh int tcp set global rss=enabled
Step 3:

Now to check if the settings are disabled type:
netsh int tcp show global
then hit enter.
Step 4:

Now the thing left is just rebooting your system and just check if the problem is solved or not and just give feedback.*chuckle*Thumbs

 

Bootcamp Drivers install, windows 7

Alright I am still having an issue with installing Bootcamp.

First I solved the "boot camp x64 is unsupported"

1. Right click computer
2. Select manage
3. Select Local Users and Groups
4. Select Users Folder
5. Double click administrator
6. Uncheck Account is disabled
7. Apply
8. Log off, then log on as Admin.

Now I have a new Issue with getting the following message during Boot Camp install

"A system restart is pending. Complete the restart and then retry this installation."

Solution : http://pc-mac-linux.blogspot.com/2008/11/restart-pending-with-bootcamp-drivers.html

My only problem is after I follow the steps in that solution, which involve :
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager and delete or rename the PendingFileRenameOperations

In Regedit I go to that specific address and this value date is always coming back into the PendingFileNameOperations registery file:

Value Data: \??\C:\Windows\NV37603704.TMP\nvsvc.ini

Everytime I start bootcamp I have to install a nvidia driver off the start, usually there are always restarts with nvidia drivers, could this be why it always says there is a pending restart?

If i could figure out why that Value data keeps coming back, i can fix it and finally install the bootcamp drivers.

Thanks guys

Edit: I have confirmed that it must be the bootcamp installation itself that is causing the Value data, I have deleted the value in the reg file, restarted, checked the registery, no PendingFileNameOperations, then i tried installing Bootcamp64 again, Nvidia installed a driver, then it went back to boot camp, then The restart is pending message came back. So I checked the registery again, and the Value data is back. How do I fix this when bootcamp itself is causing it?