Windows 10: How do I get Windows to boot instead of going to UEFI screen and finish its install?

Building a new PC ASUS ROG Hero Z790 motherboard. Have a 2TB M2 motherboard-installed SSD I am trying to use as the Windows/System drive and have a secondary 4 TB SSD drive mounted via SATA. I am attempting to install Windows 11 via a Microsoft-supplied USB. I believe I have installed the O/S but once it does the initial install, it reboots, and when it reboots, it boots into the UEFI screen see screenshot for UEFI screen settings for boot. I have to enter UEFI, exit and then hold down the F8 key to get into Windows, which then goes to the setup screen and then cannot get past the netw

:)

 

Trouble installing windows 7 on RAID in UEFI

As the title says, I'm trying to install Windows on a RAID array in uefi on my Maximus V Formula. When using legacy ROM I can install just fine but I go into CSM and change settings to UEFI only, I can build the array in the UEFI Raid driver (IRST tab in "BIOS") but the array does not show up in the boot menu and when I try to install windows (boot from UEFI DVD drive), The drive does not show up in the Windows install. The next thing I tried was to enable UEFI and legacy oprom in CSM, boot from UEFI DVD drive and install to the RAID array (probably detected by legacy oprom) and it will install. After first reboot, Windows Boot manager will show up as an option in the BIOS boot menu so I set that as first boot device and reboot. I will get to the starting windows screen and then BSOD (too quick to get codes) The last thing I tried was Changing to legacy mode and installing windows to a different drive. once installed, I initialized the Raid array as GPT and rebooted, changed csm back to UEFI only but they RAID array still doesn't show in the boot device list so I repeated the earlier process hoping that It might work because I had initialized as GPT but it still BSODs on starting windows screen. Any help or suggestions would be greatly appreciated

 

Trouble installing windows 7 on RAID in UEFI

I think you were on track with your first try. Windows installer probably needs the RAID driver in order to detect it on install.

 

Trouble installing windows 7 on RAID in UEFI

You might have been doing it wrong, but I can't say for certain.

Have you come across this article on ASUS' ROG forum for installing to a RAID device under UEFI?