Windows 10: How do i move a old windows to a external SSD

How do i move a old windows to a external SSD

:)

 

External SSD

I have recently bought external SSD, I want to know what are the things i need to take care of before using my external SSD? Any tips and suggestions are welcome. Thank you for your support.

 

Unable to Boot to Windows 10 after Cloning old SSD to new SSD

Hi,

I'm not using the SATA ports. I'm using M.2 with the SSD, and the external SSD is connected to my PC using USB. My MB only has only one M.2 socket, so I can only plug in one SSD at a time. (I bought a wrong adapter that doesn't work with NVMe) So I cloned
my old SSD to an external SSD (Samsung M3 Portable SSD), and then swapped the old one, cloned the external SSD to my new SSD.

I tried AOMEI too, but the free version does not come with disk clone functions. I would probably try Macrium Reflect as suggested above. Thank you!

 

External SSD recognized as HDD in Windows 10

Hi,



Thank you for writing to Microsoft Community Forums.



I understand your query related to External SSD showing as HDD when connected to the PC using USB 3.0 port. For further clarity on the issue, please respond to the questions below.

1. Have you tried connecting the SSD to any other PC?
   
2. Are you using any converter to connect the SSD through USB 3.0 port?
   
3. Are you using a RAID configuration?
   

I have researched on your query and found that the SSD that you are using is an internal SSD drive, in this case I would suggest you to try updating the Intel Rapid Storage drivers from the

intel website and see if that helps.



In addition, this issue can occur if the SSD is connected to a SATA controller that is identified as RAID (SCSI). I would suggest you to try connecting the SSD to a SATA port that uses AHCI controller such as Intel SATA controller/chipset.



Please get back to us with the detailed information to assist you further.



Regards,

Prakhar Khare

Microsoft Community – Moderator