Windows 10: How do I Remove my Disk Right Protection from a USB STICK

Dear Microsoft Support.It's MR NETANEL GUBBAY.I would like to find it how do I remove my Right Disk Protection from a 128GB Please can you explain to me

:)

 

Installing windows off of a USB stick

Step By Step from vista:
From admin cmd prompt

1. diskpart
1a. list disk
2. select disk 1 (replace 1 with your usb drive)
3. clean
4. create partition primary
5. select partition 1 (replace 1 with your usb drive)
6. active
7. format fs=fat32
8. assign
9. exit

Copy Windows Vista's DVD ROM content to the Flash Drive

xcopy d:\*.* /s/e/f e:\ (d being your vista cd and e being your usb stick)

And that's it, boot off your usb disk

 

update windows 10 usb stick

Sometimes there is a little button on the stick enabling hardware write protection.

If you checked and there is none it is most likely software write protection.

To turn that off in windows please follow those steps:

1. Press "Win + R" > Type: cmd and hit Enter to open "Command Prompt".

2. Type: diskpart and hit Enter to open diskpart.

3. Type: list disk and hit Enter.

4. Type: select disk X (where X is the number of your write protected USB/SD/hard drive) and hit Enter.

5. Type: attributes disk clear readonly and hit Enter to disable write protection on the storage device.

6. Close the diskpart window once the write protection removing process is finished.

This should solve the issue unless the stick is locked by you with bitlocker encryption.

Then we need to do some addiditional steps.

If you have problems execution those steps or they dont solve the problem please get back to me.

 

USB stick previously used as a boot stick for Killdisk not recognized

Try method 2 under Windows 7 8 10 here:
Free to Remove Readonly Attribute in Windows

Method 2: Clear readonly status with Diskpart

In Windows 10, 8, 7 OS, you are also able to run Diskpart in Command Prompt to clear read-only attribute on any partition on your computer. You can follow the tutorial below:

Step 1. Open Command Line and type Diskpart
Step 2. Type list disk
Step 3. Type select disk (disk number)
Step 4. Type attributes disk clear readonly





Then try Clean