Windows 10: How do I solve my RAM scenario?

I recently installed two new RAM sticks into my motherboard, and immediately after turning on the computer again I ran into a blue screen loop. I have two 8gb Corsair Vengeance 3200mhz LPX that I just bought and put into my pc. I was looking things up and saw that RAM could be one of the issues, so I removed the two new sticks of RAM and everything works fine again. I was just curious if maybe I got the wrong RAM, even though it’s the same brand, speed and size, or maybe I had to change something in the settings so it would stop crashing. The ram is the exact same as the ones in my computer al

:)

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.

 

To RAM or not to RAM...

Hey genesis what hardware have you bought, you might be able to save on the ram and step up the rest of the hardware a little...

Or you could go out on the town as suggested... *Big Grin

 

Solved

Solved! or fixed! or whatever! I was able to absorb the extra space in a 3-step process:

1. resize the System Reserved partition to use the space after it
2. reboot
3. stretch the M: data partition to absorb the space after it using the EXTEND -- not RESIZE -- command

System rebooted and working normally. THX all.