Windows 10: How do install an additional TAP-Windows adapter?

I have two hosts that I connect to using VPN. One uses OpenVPN, the other uses Watch Guard's Mobile VPN. I have one TAP-Windows adapter which works for either connection, but I would like to have both connections open concurrently.

How do I install another adapter? OpenVPN's site shows how to install one, but when I try it I get "tapinstall failed".

:)

 

Uninstall TAP Windows Adapter V9

SOLVED

• Step 1: Download OpenVPN and install with ALL features from HERE : Community Downloads | OpenVPN
• Step 2: Open CMD.exe as administrator and go to the file location of "C:\Program Files\OpenVPN\bin" or whatever that turns out to be.
• Step 3: Follow the "Installing and uninstalling TAP-drivers" section from the website
  
  HERE : https://community.openvpn.net/openvpn/wiki/ManagingWindowsTAPDrivers
• OR JUST READ BELOW
• Step 4: How to get the <id> for the next section:
  • Go to Network Connections
  • Right click the TAP device you want to remove
  • Click Properties
  • Click Details
  • Using the drop-down menu, get the Hardware ID
    • This is usually something like: tapoes, tap0901 etc
• Step 5: Remove those suckers by typing the following into CMD: tapinstall.exe remove (ID from step 4)
  • it should look something like this below:

• Step 6: If you have devices that were not removed, repeat Steps 4-5 for all TAP adapters
• Step 7: Restart!
• Step 8: Uninstall OpenVPN and you're all set!

Supplementary information from the site:

Occasionally you may need play with different TAP-driver versions. In this case you can use devcon.exe from the Windows command-prompt. Below are some common commands you can run from an administrator Powershell
or cmd.exe console:

List available TAP-Windows adapters:

List network interfaces (incl. TAP-Windows adapters):

View information about an installed driver:

Uninstall a TAP-driver:

To verify TAP-driver removal:

Install a new TAP-driver:

Update a TAP-driver:

Notes:

• <id> refers to the driver identifier which is tap0901 for OpenVPN 2.2+, but may be different in older/newer OpenVPN versions.
• <something.inf> is typically OemWin2k.inf (old tap-drivers) or OemVista.inf (newer tap-drivers). You need to specify the full path to this file, e.g.C:\Program Files\TAP-Windows\driver\OemVista.inf.

By installing multiple times, you will create additional TAP-Windows adapter instances, which can be used for multiple concurrent VPN tunnels. It is also possible to install using Control Panel -> Add New Hardware,
and it is possible to uninstall using Control Panel -> System -> Hardware -> Device Manager.

 

windows xp installation and dual core am

could someone please list the steps they follow to install windows with a dual core processor and windows xp service pack to. I'm reletively new to amd dual core and i feel i'm missing a step. All help will be appreciated. thanx

 

IP configuration not valid - interference from ethernet adapter?

Solution 1: No Internet Access In Windows 8.1or Windows 10

Step 1:

Go to Device Manager → Network adapters.
Step 2:

Expand it (Network adapters).


Step 3:

Select your network adapter


Step 4:

Right click on your wireless network adapter or Ethernet adapter and then tap “Update Driver Software”.
(in this case your network adopter is Ethernet adopter so tap your Ethernet adapter)
Step 5:

Now on a new window you will need to click on “Browse my computer for driver software”.




Step 6:

Then select “Let me pick from a list of device drivers on my computer”.



Step 7:

Now choose the “Manufacturer’s drivers” from the list of two and then click next.



Step 8:

After the completion of the process just restart your PC and check if the problem is solved or not. If not, goto solution 2.



Solution 2: No Internet Access In Windows 8.1,windows10

Step 1:

Open command prompt.
Step 2:

Just go on hitting the enter after typing the each command.
netsh int tcp set heuristics disabled
netsh int tcp set global autotuninglevel=disable
netsh int tcp set global rss=enabled
Step 3:

Now to check if the settings are disabled type:
netsh int tcp show global
then hit enter.
Step 4:

Now the thing left is just rebooting your system and just check if the problem is solved or not and just give feedback.*chuckle*Thumbs