Windows 10: How do Install win 10 on a new hdd

My Toshiba Inspirion’s hdd has rolled over with its little legs in the air ( dead fly syndrome). I have installed a new hdd & cant load my Win 10 on it as it has no dvd Drive. Help would be very much appreciated. I have reinstalled Windows before but there’s always been a dvd drive.

:)

 

Installing a new HDD to replace a HDD of the same size that failed.

I have a Windows 10 OS installed on my C: drive. I had data stored on an HDD designated as D: drive. That second drive failed and was replaced by a new HDD. Both are the same size and type of drives, except different manufactures. The new HDD is not
listed in File Explorer. It is listed in Computer Management under Device Manager as a Disk drive. Disk Management under Storage does not list the new HDD.

I have tested the new HDD with software downloaded from the manufacture and it has passed all tests. At least that software was able to access the new drive and perform low level tests to see if it is operational.

Looking at the events log for this HDD, I find an event warning that says "Device ... was not migrated due to partial or ambiguous match." Opening up the properties indicates drivers have been installed. Reading the volume information results in: "Volume
information for this disk cannot be found"

I suspect that the problem with the volume information is associated with the warning in the event log. I removed the HDD, restarted the PC then shut it down to start the installation process over again. No change in the event log or status of the new
HDD. Can anyone suggest how I can get past that warning?

 

Fresh Windows 10 install on new HDD

Hello,

Please refer this step-by-step guide to make clean install:

Clean Install Windows 10

Let me know if this helps!

 

Win.10 won't boot after installing Win.7

Hi,

So i installed Win.10 via the UEFI and after installing Win.7 on Legacy Mode onto a different HDD i can't boot into Win.10 (I believe can only because Win.10 was installed via UEFI)

I tried installing the BCD Software but nope. I even tried to select my HDD but say Winload.exe error

Even tried going into the USB and try repairing but the same thing happens