Windows 10: how to access wifi network interface in wsl2 an use ettercp to sniff the wifi network

i want to be able to use ettercap on my wlan0 to sniff for packets in my wsl2.this was the tutorial i used to install my wsl. Don't get me wrong, i can use internet on kali through `eth0` but if i scan `eth0` the only host is me.

if i run `ifconfig` i get

eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 172.17.73.8 netmask 255.255.255.240 broadcast 172.17.73.15
inet6 fe80::215:5dff:fe4d:9d82 prefixlen 64 scopeid 0x20<link>
ether 00:15:5d:4d:9d:82 txqueuelen 1000 Ethernet
RX packets 437343 bytes 309863593 295.5 MiB
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 276812 bytes 535593285 510.7 MiB
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 Local Loopback
RX packets 20 bytes 3101 3.0 KiB
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 20 bytes 3101 3.0 KiB
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

if i run `iwconfig` i get

dummy0 no wireless extensions.

bond0 no wireless extensions.

sit0 no wireless extensions.

lo no wireless extensions.

eth0 no wireless extensions.

if i run `iw dev` i get

nl80211 not found.

:)

 

Poor transfer speeds over network with WiFi [Solved]

The more devices accessing the wifi the more traffic there is,qos has to schedule bandwidth, there could be other wifi networks on same channel as yours is...

 

Wifi networks not accessible

Every time windows 10 updates my computer I am unable to see or connect to available wifi networks. I try turning wifi on but the button keeps turning off. When I undo the windows 10 update, I can access wifi networks. I've done this at least 3 times!
I've tried several of the Microsoft suggestions and nothing fixes it except undoing the update.

 

Only 1 WiFi network


My network list on my phone:




My windows network list: