Windows 10: How to analyse output sound?

I'm trying to adjust viper4windows for watching movies and streams. Is there a way to see the output signal in a spectral analyser? Does someone know a specific application for it? Or how to root the output signal to input, so I can analyse it with one of the million freeware analyser out there?

submitted by /u/nogczernobog
[link] [comments]

:)

 

Overclocking / Undervolting guide for Vega 56 or 64?

Here's a quick laundry list:

List of software to use for overclocking and testing
Examples:
Wattman (and how to find and use it, like an overview, including profiles)
Unigine Valley or Heaven (use this for quick testing while changing settings in Wattman and checking for stability / artifacts) ...just suggesting this
How to monitor cores / mem speeds and temps during testing (I've seen screen overlays, and others using GPUz)

Step-by step overclocking in Wattman
Fan speeds
Power limit
Temp limit
Voltages
Core speeds
Memory speeds

 

PSU analysing software

Quick question..anyone know of software that can analyse your PSU in real time?

• Temp
• effiency
• Wattage usage

Edit: My hard disk drive keeps failing to boot the operating system whenever I attempt to overclock the CPU ever soo slightly. However the bios says that it is 100% save and all other devices work fine, a friend alerted me that my PSU may be under powered, a full specifcation will be posted later.

 

How to factory reset Cisco 1700 Router

Hopefully I can help you here....its a very common thing to happen.


First, I take it you dont know the passwords for console access or telnet/ssh?

I will assume that these devices belong to you.

step 1. Plug a cisco console cable into a serial port on your pc
step 2. Plug other end into Cisco console port
step 3. Using hyperterm or putty or similar connect to the serial port
step 4. boot router, and make sure you clearly can see the output (this confirms you have good serial comms)
step 5. if this fails, adjust the comm port settings (9600, 8,1,n are the default)
step 6. now you have to do the only hard part...send the break command:

Break command list: Break Commands

Go down the list and match your OS and SW and try the sequence suggested.

If this fails several times do what I do: Install putty (free) and then to send a break so you can get into rommom just hit "ctrl-a b".