Windows 10: How to bring up the Booting EFI menu in my desktop pc?

Motherboard: Asus TUF B365M-PLUS GAMING. It is NOT F12, that's all I know for sure. When the pc is booting up it shows that one can use F2 to get the BIOS settings, which is good but not what I am looking for. In my laptop and desktop pcs I just use F12 and I can choose a different drive to boot up with. I found the manual, but this info doesn't seem to be there. Thanks in advance guys, DPC

:)

 

No startup boot menu

Hello Kimoefat,

Thank you for posting your concern in Microsoft Community and welcome to the Windows 10 Family.

As an initial recommendation, I would suggest you to access the System configuration utility and check if the Operating System installation path for Ubuntu exists. To do so, follow the below steps.

• Type msconfig in the search bar and select System Configuration from the search results.
• Select the boot tab in the System configuration console to check if the installation path for Ubuntu exists.

If it exists, next logical step is to check if the boot menu time out has been set to 0, which results in Boot menu not showing up.

The boot menu time-out determines how long the boot menu is displayed before the default boot entry is loaded. It is calibrated in seconds. To change the boot menu time-out, use the Bootcfg
/timeout switch. Valid values are from 0 through 999. You cannot use Bootcfg to set an indefinite time-out.

You can run the following Run command line to set the boot menu time-out accordingly. To do so, follow the below steps.

• 
  Press Windows key + X, select
  Command prompt (Admin) to bring up elevated Command prompt
  
• 
  Type in the following command: bootcfg /timeout 10
  
  timeout 10 will set the time frame to 10 seconds
  

However, if the Boot path for Ubuntu does not exist in the boot menu of System Configuration utility, I would suggest you to check if the Ubuntu is overridden by the Windows installation or if the Ubuntu installation files are corrupted.

Hope the above information is helpful. If you need further information, feel free to write to us and we would be happy to help you.

Thank You.

 

Windows defender offline error: EFI\Microsoft\Boot\BCD - 0xc0000185

Hi Dave,

Could you provide us additional information to assist you better with this issue:

• What is the make and model of your device?
• Have you made any changes to the operating system prior to this issue?
• Are you able to boot the device to desktop with this error message?

This issue might have occurred due to corruption in the boot files or BOIS unable to detect your drive to boot.

I suggest you to refer to the below thread, check if your issue matches with the same.

If so, try the troubleshooting steps suggested by -.[Final]#[Boss].- and check if
it helps.

Error code after update File:\EFI\Microsoft\Boot BCD
Error Code 0xc0000185 BSOD

Hope this information is helpful.

 

Can't disable UEFI boot on HP 250 G3

I got it, I was not accustomed to UEFI (because on HP 4540s I disabled it) and I automatically thought that if I boot from the first menu it will boot in UEFI mode, but I have to go to second menu "Boot From EFI File" to get a list of EFI boot options:



I installed Ubuntu Mate and Windows 8.1 from the first menu (the picture) and they both installed in BIOS mode. Quite simple really.