Windows 10: How to configure the USB Port as a Full-Speed in Windows10

Hi All,


I want to know how to configure the USB Port as a Full-Speed in Windows10.

Could you tell me how to do that?


Actually I need to configure the USB Port as a Full-Speed to confirm the USB Speed of the attached device.


Best Regards,

Eric.

:)

 

USB Port Oddities


Ok, let's see it with pictures step-by-step. First right-click on the USB device and select Update driver software:





Then select Browse my computer for driver software (LAST option) :





The select Let me pick from a list of device drivers on my computer (LAST option) :





Then select the standard driver from the list and click next:





Click next/OK as required to complete installation. Repeat the steps for all Intel USB devices. Finally click on each USB root device and press DEL to delete it, reply YES when asked. After deleting all USB root devices restart the computer.

I hope this is detailed enough...

 

USB 3.0 transfer speed drops to 0 only on one port. USB port and external drive are NOT defective.

I have a Dell XPS 13 laptop with two USB 3.0 ports. I connect a Seagate expansion drive to the left USB port and transfer a 4GB test file. It transfers about 1GB at 150MB/s and then transfer speed drops to 0. Then it picks up again after 3-4minutes, then
drops again intermittently.

I connect the same Seagate drive to the right USB port. The same 4GB file transfers with a constant speed of approximately 150MB/s. Thus the Seagate drive is not defective. Perhaps the left USB port is defective.

I connect a Sandisk 128GB flash drive to the left USB port (that is now suspected defective). It transfers the same 4GB file with constant 130MB/s speed, no speed drops!

Each step is reproducible 10x.

I am out of my wits here.

 

USB Ports

Hi Homer,

We'd like to ask a few questions to help us isolate this problem.

• Have you tried connecting your device tracker to a different USB port on your computer?
• If so, was it detected?
• Did you receive any error messages?

To address this issue, we suggest that you follow the troubleshooting steps shared by Praveen Venogupal on this

link.

Let us know how it goes.

Regards.