Windows 10: How to disable usb for Windows

How to disable usb for Windows. wndows10 profession 1909How to undisable it after it is disabled. And how to unlock some usb, but not all?

:)

 

Installing windows off of a USB stick

Step By Step from vista:
From admin cmd prompt

1. diskpart
1a. list disk
2. select disk 1 (replace 1 with your usb drive)
3. clean
4. create partition primary
5. select partition 1 (replace 1 with your usb drive)
6. active
7. format fs=fat32
8. assign
9. exit

Copy Windows Vista's DVD ROM content to the Flash Drive

xcopy d:\*.* /s/e/f e:\ (d being your vista cd and e being your usb stick)

And that's it, boot off your usb disk

 

Disable "Power Surge on USB" message

Hi David,

If the system detects that a USB port is going over the power limit, the system is set to notify the user by default. However, since you mentioned that you're still getting the notification after you disabled the alerts, we suggest following these steps
instead:

• Right-click the Start button.
• Choose Device Manager.
• Click the drop-down arrow beside Universal Serial Bus controllers.
• Right-click anything that has USB Host Controller in its name, and select
  Properties.
• Go to the Driver tab and select Uninstall.
• Restart your computer. The driver will be reinstalled automatically.

Let us know if the error notification disappears after following these steps.

 

windows problems with usb mic

Hi Dave,

Thank you for posting your query in Microsoft Community.

I suggest you to run the Hardware Troubleshooter by following the steps provided below and check if the issue persists.

Method 1:

• 
  Type “Troubleshooting” on the search bar.
  
• 
  Click on troubleshooting, then click on “Hardware and sound”.
  
• 
  Under Hardware and sound, click on “hardware and devices”.
  
• 
  A pop-up will appear, click on the “Next” button and your hardware troubleshooting will start.
  

Method 2: Disable and re-enable all the
Universal Serial Bus controllers (USB) controllers.

The USB controllers represent the USB ports in Device Manager.

To disable and re-enable the USB controllers, follow these steps:

• 
  Press Windows key + X, Click on
  Device Manager.
  
• 
  Expand Universal Serial Bus controllers.
  

• 
  Right-click the first USB controller under Universal Serial Bus controllers, and then click
  Uninstall to remove it.
  
• 
  Repeat the above step for each USB controller that is listed under Universal Serial Bus controllers.
  
• 
  Restart the computer. After the computer starts, Windows will automatically scan for hardware changes and reinstall all the USB controllers that you uninstalled.
  

Regards.