Windows 10: How to downgrade USB 3.1

USB 3.1 has its' problems, is there a way to downgrade it?

:)

 

Installing windows off of a USB stick

Step By Step from vista:
From admin cmd prompt

1. diskpart
1a. list disk
2. select disk 1 (replace 1 with your usb drive)
3. clean
4. create partition primary
5. select partition 1 (replace 1 with your usb drive)
6. active
7. format fs=fat32
8. assign
9. exit

Copy Windows Vista's DVD ROM content to the Flash Drive

xcopy d:\*.* /s/e/f e:\ (d being your vista cd and e being your usb stick)

And that's it, boot off your usb disk

 

bsod after downgrading from windows 10 to windows 7


Hello there, tom.
I would try these:

• Get your Windows 7 media device and reinstall Windows
• Try auto-repair
• Follow these steps:

1. Put in your Windows 10 media device, boot into the USB
2. Select your language and keyboard input, then click next.
3. Click "Repair this computer"
4. Go to "Advanced options"
5. click system restore
6. Select a restore point before you downgraded to Windows 7.

Hope I helped!

 

How To Format A Write Protected Flash Memory ?

¿You already tried this one?...

Run CMD


1. diskpart
2. list disk

Then in the 3º step, put the correct number of disk in the list for the usb flash (if it's listed in disk 3, then you'll have to write select disk 3).

2. select disk #
3. clean
4. create partition primary
5. select partition 1
6. active
7. format fs=fat32
8. assign
9. exit

with that commands you will format the flash drive in fat32, if you have a large drive you can select also "format fs=ntfs" in step 7.

good luck!