Windows 10: How to Enable all Microsoft services?

How do I enable all services if I have disabled them all including Microsoft services and shut down the computer?


I disable all services including services and shut down the computer. Now i can nit even sign in my pc. As far i can see, the wifi logins are also gone. All saved data seems to be disabled

:)

 

How do I Enable all service?

Hi,

Please follow the steps below and check how to do ti.

• On the General tab, tap or click the Normal Startup option.
• Tap or click the Services tab, clear the check box beside
  Hide all Microsoft services, and then tap or click Enable all.
• Tap or click the Startup tab, and then tap or click Open Task Manager.
• In task manager, enable all of your startup programs, and then tap or click
  OK.
• When you are prompted to restart the computer, tap or click Restart.

Hope this post helps. Get back to us for further queries. We are happy to help!

 

Overclocking / Undervolting guide for Vega 56 or 64?

Here's a quick laundry list:

List of software to use for overclocking and testing
Examples:
Wattman (and how to find and use it, like an overview, including profiles)
Unigine Valley or Heaven (use this for quick testing while changing settings in Wattman and checking for stability / artifacts) ...just suggesting this
How to monitor cores / mem speeds and temps during testing (I've seen screen overlays, and others using GPUz)

Step-by step overclocking in Wattman
Fan speeds
Power limit
Temp limit
Voltages
Core speeds
Memory speeds

 

All right boys, opty it is

Good thing I wrote all this down so I don't have to type this every time someone asks *Stick Out Tongue
Step one- Set time, date
Step two- In CPU settings, disable cool n quiet, set memory clock to DDR400, play with memory timings (CAS-TRAS-TRP-TRCD), which are listed in the bios in the order CAS, TRCD, TRAS, and TRP.
Leave MA timing at 2T unless you think your system can handle 1T
Step three- in Chipset settings, enable onboard LAN, disable onboard Audio, disable AGP fast write, set primary graphics adapter, and set CPU-NB and NB-SB link speed to 1000mhz.
Step four- in IDE, disable controllers you aren't using. On all drives detected, enable SMART if you can and set PIO/DMA as high as they will go.
Step five- Enable legacy USB support
Step six- Set password if you're worried about anyone screwing around with your BIOS settings
Step seven- Configure your boot sequence. I reccomend hard drive first, optical drive second, and floppy drive third.
Step eight- Save changes, boot into XP, and enjoy your computer