Windows 10: How to fix HYPERVISOR_ERROR

About a year ago, I built a PC with:Intel Core i9-10850KGIGABYTE NVIDIA RTX 4060 EAGLE 8GB VDDR61TB M.22x8GB DDR4When I first put it together I kept getting BSODs with these error messages: IRQL_NOT_LESS_OR_EQUAL and UNEXPECTED_KERNEL_MODE_TRAP. I replaced my current RAM for 2x16GB, but I was still getting BSODs. Next, I took the graphics card of the PC and just used my CPU's integrated graphics and it stopped crashing!I told GIGABYTE about my problem, did everything they suggested, then they just told me that I had a faulty GPU and that was the end of it. So, I've been using my CPU's graphics

:)

 

Programs not working

In post 26 there were steps listed to fix the operating system corruption.
Are you able to follow them?
In post 29 was the suggested dism repair command.

 

2 x SSD Raid 0 - is this right?

T ski b4 your done with this post can you list a step by step fix of what you did, I would appreciate it if you would...Thanks

 

SYSTEM_SERVICE_EXCEPTION and HYPERVISOR_ERROR BSOD's

Hello,

In the past few weeks, I've been regularly experiencing BSOD's, typically SYSTEM_SERVICE_EXCEPTION and HYPERVISOR_ERROR with BlueScreenView blaming ntoskrnl.exe

I've already tried the following (in order):

• Complete re-install of Windows 10, followed by the bare minimum of software
• Complete driver re-installation with Driver Easy
• Removal of 1 RAM DIMM, which seemed to work out but despite that, I had another BSOD today.
• sfc /scannow, did not find any integrity violations
• chkdsk doesn't return any issues

Also:

• Memory diagnostics did not return any issue
• SMART values of the disks are all right. Only the disk with the D: partition on it is showing some ageing, but it only has Steam games on it and the BSOD's happen outside gaming so that shouldn't be relevant.

What's next to try? Any info to add?

Memory dumps to be found here: Microsoft OneDrive