Windows 10: How to fix this without doing a reset

RecoveryYour PC/Device needs to be repairedThe operating system couldn't be loaded because the system registry file is missing orcontains errors. File:\WINDOWS\system32\config/systemError code: 0xc000014cChoose one of the options below to address this problem.

:)

 

How to factory reset Cisco 1700 Router

Hopefully I can help you here....its a very common thing to happen.


First, I take it you dont know the passwords for console access or telnet/ssh?

I will assume that these devices belong to you.

step 1. Plug a cisco console cable into a serial port on your pc
step 2. Plug other end into Cisco console port
step 3. Using hyperterm or putty or similar connect to the serial port
step 4. boot router, and make sure you clearly can see the output (this confirms you have good serial comms)
step 5. if this fails, adjust the comm port settings (9600, 8,1,n are the default)
step 6. now you have to do the only hard part...send the break command:

Break command list: Break Commands

Go down the list and match your OS and SW and try the sequence suggested.

If this fails several times do what I do: Install putty (free) and then to send a break so you can get into rommom just hit "ctrl-a b".

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.

 

Windows 10 infinite restart black screen


The tutorials provided are just a list of troubleshooting steps. Use only the steps which apply to you.

Since none of the troubleshooting steps here worked, I'd suggest you do a Clean install.

John